Announcement

Collapse
No announcement yet.

Brush guard

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    Brush guard

    Hi, I am wondering if any one has installed a brush guard or made a custom bumper for the front?
    Mine front and rear bumpers are rusted out and wanted to make custom so if you hit a deer the body damage will be minimal.
    Any help would be appreciated
    thanks
    Tags: None
  • #2
    i dont think that will look very good but you never know. if i where you go to the junk yard and look around for one off a small jeep or suzuki sidekick or somthing like that and cut and weld it to shorten it or what ever.


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment

    • #3
      Put enough armor on the car and it'll look like a little Road Warrior reject!

      Comment

      • #4
        someone on here has a lime green festiva with bush guard. it looks awesome!
        89SX funtop! Fully loaded!
        RIP 90LX

        Comment

        • #5
          Originally posted by stefan
          someone on here has a lime green festiva with bush guard. it looks awesome!
          yeah i remember seein it at the spring ohiostiva meet, just can't remember who's car it was

          1988 323 Station Wagon - KLG4 swapped
          1988 323 GT - B6T Powered
          2008 Ford Escape - Rollover Survivor

          1990 Festiva - First Ever Completed KLZE swap (SOLD)

          If no one from the future stops you from doing it, how bad of a decision can it really be?

          Comment

          • #6
            This one??

            It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativity

            Comment

            • #7
              YES !!!

              Thanks Kemp , I was just getting ready to look for that
              ------------------------------------------------
              The Trigger - Midwest Festiva Inc., Illinois Chapter
              Smart Passion white with H-D interior
              HD2500 Duramax Chevy
              Harley Davidson Ultra classic ..I am in love !!
              Pro Street S-10 http://www.cardomain.com/ride/2214968
              Diamond white Deville 27,000 mile cream puff
              Z28 LS1 power 500 +
              90 Festy L daily driver wants to be modded, OK
              It is being modded , a little at a time http://www.cardomain.com/ride/2214953


              Join me on Facebook !! ;http://www.facebook.com/profile.php?...00000295094896

              Comment

              • #8
                Thats austyfrosty's car.
                Brian
                http://www.cardomain.com/ride/2274977



                93 GL modyfied!!!
                :fish:

                Comment

                • #9
                  that does look cool, put some lights on one of the bars and then a light rack on the roof then a winch on it to then it would look cool.
                  that would be awesome if there was a big lifted truck stuck in a ditch or something and a festiva pulls it out!!!


                  Mike, AKA the sasquatch
                  1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                  Comment

                  • #10
                    Thats what I was planning, how would you install a roof rack?

                    Comment

                    • #11
                      hahaha that brush guard actually came out very good.

                      Comment

                      • #12
                        i drew one up a little wile ago. all you have to do is drill a copple of holes in the roof for wires and mounting holes.
                        my fab skills are better than my drawing skills lol you can also make runing bords and a rear bumper and a exo skleton to.
                        then it will bee a bush buggy lol. and if you roll over it wont crush the roof. BONUS!!! this is my drawing
                        Photo Storage
                        http://s228.photobucket.com/albums/ee217/sasquatch369/?action=view&current=festivadrawing.jpg
                        Store your photos and videos online with secure storage from Photobucket. Available on iOS, Android and desktop. Securely backup your memories and sign up today!


                        Mike, AKA the sasquatch
                        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                        Comment

                        • #13
                          it cut a bit off the photo, my name is not asquatch


                          Mike, AKA the sasquatch
                          1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                          Comment

                          • #14
                            i just thought, where abouts are you stevend135 cause i might be able to help with making or installing it if you need any help


                            Mike, AKA the sasquatch
                            1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                            Comment

                            • #15
                              wisconsin

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X