Shift Boot

[leapin]

So sasquatch and I were at the JY today and sasquatch made a discovery! an 89 camry shift boot fits the console!!!
as pictured below

[dahodges]

Dah! Look at my previous posts. Did you use the retaining ring also. Now If you can find a gray shift knob off of a early 90's MX6. Or my be a 626 you will have a close copy of the LX console.

David

[25Horseplay]

This is good to know.

[rolla4me]

nice!

[sasquatch]

this sasquatch guy sound like a genius lol mine dose not want to clip in, can i see a pic of the bottom, i think i broke somthing off

[freshtiva]

Nice discovery !

[freshtiva]

Here is how to make your old knob work. ( no viagra jokes please )

http://www.fordfestiva.com/forum/viewtopic.php?t=13048&start=0&postdays=0&postorder=asc&highlight=shifter+knob+adapter

[leapin]

Dah! Look at my previous posts. Did you use the retaining ring also. Now If you can find a gray shift knob off of a early 90's MX6. Or my be a 626 you will have a close copy of the LX console.

David

No ring required. Cliped in perfect...i think to get it in i slid one side in first.

[leapin]

sasq....maybe clip is bent some?

[sasquatch]

nope mine is about 1.5cm to short... ill try and get some pics

[GenevaDirt]

It is just a longer and bigger boot at the bottom...and it goes in from the top instead of from underneath....nice sub for an original.

[scitzz]

Very Nice! Good looking out, guys!

[Festiva_tunner]

Re: Shift Boot

So sasquatch and I were at the JY today and sasquatch made a discovery! an 89 camry shift boot fits the console!!!
as pictured below

So does that come with the same retainer as the LX or a very good replacemant? and is the 89 the only one that works?

[leapin]

The boot has clips on the bottom...no retainer ring...89 camry is what we found it on but any camry of that body style should work i would think.

[GenevaDirt]

Hey Fresh...could you post a pic of the top veiw of that console you have....Thanks. With the knob on it.