Tweet
Has anyone installed and painted there tail finisher pic please?
-
Renegade-Midwest Festiva Inc.Illinois Chapter
93 Festiva L Aspire 5sp Lots of upgrades & mods
99 Dodge Caravan SE
95 Taurus SHO auto 265hp
94 F150 351W auto (for sale)
78 Chevy elcamino 500hp 383 stroker
78 Chrysler Cordoba 360 (for sale)
03 Harley Davidson Electra Glide
95 Honda 1500 Goldwing SE
95 F150 4X4 6 inch lift,38" mudders
95 Iszuzu Trooper LS -
Jim DeAngelis
kittens give Morbo gas!!
Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
Performance Red 94 Aspire SE (Stimpson) -
Mine is sprayed (ie. rattlecan) in my basement... I just didn't get the mounted part yet.Simon - pimptiva.comComment
-
I'm still waiting for my much overdue stimulus check so i can get mine. Mine will be painted quick to. I already painted my grill and rear upper spoiler.---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
By George......IT JUST CAME IN!!!!! Stimulus time!!---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
I'm still waiting to be 'stimulated'...Jim DeAngelis
kittens give Morbo gas!!
Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
Performance Red 94 Aspire SE (Stimpson)Comment
-
Me too. By the way, where do you get a 'Tail Finisher'? I wasn't aware that my tail was 'unfinished'.Originally posted by FB71 View PostFestiva: Because even my dog can build a Honda.
---------------------------------------------------------------------------
'90 L. B8ME/Kia Rio 5 speed. Rio/Aspire suspension swap. :-D
'81 Mustang. Inline 6, Automatic.
'95 Eagle Summit Wagon. 4G64 Powered.
Comment
-
they were a group buy from rolla4me and dindog. Happened back in April i believe.---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
Mine was due last week and still hasn't come. I just checked online and now it says it won't be issued for 2 more weeks:evil: Not happy.Originally posted by FB71 View Post
Comment
-
Yup i'm waiting for the same reason.Originally posted by festivaWES View Post
It's a good thing you don't read the stickies, you might of learned something.
Poverty produces creativityComment
-
HA HA! The beauty of direct deposit. Mines been and gone again. I stimulated a couple of peoples economy here with it.
Search Master - Honorary Member of Midwest Festiva Inc., Gulf Coast Chapter
Everyone is entitled to be stupid, but some abuse the privilege.
- Unknown
I don't like superstitious people. They're bad luck. - Serge A. Storms
If at first you don't succeed, failure may be your style.
- Quentin Crisp
God, please save me from your followers!
- Bumper StickerComment
-
I installed mine as the maker intended with the metal tabs and the one bolt, and the first time I closed the hatch the TF broke. It cracked on both end where it wraps around above the tail light.'89L 110k mi. BP/G swapped
'90LX 68k mi. wrecked 12/14 RIP
'90 F250 4X4 108K mi.
'13 Kia Rio 5 LX 70k mi.
'18 Kia Soul 40k mi. Daily
'64 Studebaker Gran Turismo Hawk
'66 International Harvester pickupComment
-
OUCH!!
David, maybe you could write this up and describe what may have gone wrong and suggest a "cure."
I didn't get a tail finisher, but I just got "stimulated." It all went directly to my VISA bill, which went down under $500 for the first time in years. Next paycheck I'll pay it off completely before I begin running it back up again.
Karl'93GL "Prettystiva" ticking B3 and 5 speed, backup DD; full swaps in spring!
'91L "AquaMutt" my '91L; B6 swap/5 speed & Aspire brakes, DD/work car
'92L "Twinstiva" 5sp, salvage titled, waiting for repairs...
'93GL "Luxstiva," '94 B6 engine & ATX; needs overhauled
'89L "Muttstiva," now a storage bin, future trailer projectComment
-
I received mine in the mail today...not to impressed impressed on the quality really thin fiberglass should of did 4-5 layers. Those tin tabs are only good for one bend after that they don't like to re-adjust at all. The center screw doesn't even line up with anything and i had to take off my center plastic piece that holds the license plate light off. Also there is a minor gap in the center about a foot long. I'm going to try it on one of my other hatches
** had minor body work issue on my white car, wouldn't fit in the center and driver taillight**Last edited by festivaWES; 08-19-2008, 12:14 PM.---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
Well i test fit it another hatch still a little gap in the center, and the bolt stud hit the grab handle dead center meaning when installed you cannot open your trunk. Better cut the stud off first instead of test fit it that way you dont have to manually unlock it by crawling in the back and pulling the rod after pulling the grey access panel.
**Hatch on my california car and no dents what-so-ever...straight bare metal**
Will post photos during fit stages, pre paint and after paint.Last edited by festivaWES; 08-19-2008, 12:16 PM.---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
Comment