Installing non-oem seats --- Rail question

[benms79]

I opted for the prelude seats in both of my festivas. I like them quite a bit

i like these seats,looks good, nice cat too!! lol

[festivaWES]

I like the color on the wall!!!

[93SOHC]

I did 92-93 Mx-3 seats. Was going to fab something to use the Mazda brackets but seemed like a p.i.t.a. so I had to use the festiva rails on the mazda seats. So now I have comfy seats but they still rock up and down. Any idea how to stop the wobble from stock festiva seat rails?

[freshtiva]

"Any idea how to stop the wobble from stock festiva seat rails? "


Replace these gliders. You probably have a broken one.

[bhazard]

I REALLY wanna put my extra turbo coupe seats in my festiva. I do NOT want the power in the drivers seat though. That one seat has to weigh a good 80 lbs alone.

[93SOHC]

"Any idea how to stop the wobble from stock festiva seat rails? "


Replace these gliders. You probably have a broken one.

so I have to disassemble the rails I would assume. when I took the cushions off the frames the rails were extremely over greased as well. I would assume I have 4 broken gliders case both seats do the same thing. If only there were 1 festiva in any junkyard near me...

[freshtiva]

To replace the gliders you would have to drill out the rivets that keep the tracks from separating. The rivets are pretty soft though and its easily done. Just use a center punch to start the drill on center and use some cutting oil at low rpm. I can post more pics if you need them.

[93SOHC]

got a good bit and plenty of punches. thanks again