you wired into the dimmer switch!!!! you need a constant power and ground ad then the other two wires are signal and light. you can't have the constant ground attached to the light switch.
Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
^I'm at work but i got pics of the wire on my home compy...ill post em this evening. As for the illumination, i just tapped into the dimmer switch.
__________________
Aqua 93 L
Red 06 Mazda 3
leapin
View Public Profile
Send a private message to leapin
Visit leapin's homepage!
Find More Posts by leapin
Add leapin to Your Buddy List
red wire to fuse box black to ground green to coil and white to lights?????
yes... white is the lights.. i did mine to the headlamp.. which i tapped into at the dimmer switch (but not the dimmer lead) i can't recall off the top of my head what wire color it is..
-"Hairlipstiva" 1991 GL 5spd (swapped from an auto), rolling on Enkei 14x6 +38 with 195/45/14 Toyo's, Jensen MP5720 CD deck, tach install, LED strip in cluster, down position rear wiper, FMS springs, Gabriel shocks on 4 corners, Acura Integra short shifter
-Escort GT 91 donor car with BP, G5M-R tranny to be dropped in the little guy...
-Aspire brake swap COMPLETE! https://www.wunderground.com/persona...?ID=KOKOWASS38
lol when i tried putting that vintage tach in mine i put illumination into the cigarette lighter fuse.... i'm from iowa so it seemed like an perty nice idea... worked too
Comment