Some recent work on the Tin Can

[JoDan]

Man, your car looks like mine does... its so dirty... but my friends write really weird stuff on my car

[Festiva_tunner]

Your car needs a bath!!!

HA HA I know Gravel tends to do that

[Biglay5150]

Your car needs a bath!!!

[Festiva_tunner]

Update

Got the spoiler painted and mounted

[Festiva_tunner]

not showing a spoiler (though i do have several). to which do you refer?

He was making an inside joke - the spoiler in the picture is the one I bought off him - which is now black

[geezerstiva]

^^X2 on that one!! :lol:

[cubstiva1]

i think he talking about the one in the pics of "tunners" car. and btw why do you have several and i have none?

[FestYboy]

Nice spoler by the way...

not showing a spoiler (though i do have several). to which do you refer?

[CharlieZ]

Just another source FYI, I had a 91 Dodge with nozzles attached to wiper arms.

[Biglay5150]

I like the look of the mirrors matching the color of ther car. My friend has red mirrors on one of his and it looks good.

[Festiva_tunner]

Did you paint the mirrors too? Or are you running them the way they were?

They are the way they were for now but they will be painted as well

[Biglay5150]

Did you paint the mirrors too? Or are you running them the way they were?

[Festiva_tunner]

Nice , hope to see it in person sometime .:p

No promises but I'm hoping to get it on the road for Ohiostiva

ok I said I would take pictures of the routing so here they are:

You'll want to trim the lines to fit with the wipers in the up position since thats where they will use the most hose

Here is where they T - you'll have to trim a little of the hood seal to make the hose fit

Left side routing - I forgot to mention I had to use a butt joint connector to lengthen the hose for the left side, using the exccess hose from the hood

Right side routing
I haven't had any problems with rubbing or wear on the hoses and they have been installed for 3 years now

[packrat427]

Nice , hope to see it in person sometime .:p

[Damkid]

Funny you should mention the GM sprayers. I just tried them to see if they would work and it turns out that there isn't enough room between the wiper arm and the blade itself. There probably is a way to do it but I think it would require modified the sprayer.

i've seen at Candian Tire they have a conversion kit to have the sprayers on the wiper arms