Tweet
I have a mercury tracer laying around and last time I had a festiva, I remember a lot of parts would switch over. Will the door handles swap over? I have a broken drivers side and would prefer to use free parts.
-
Give it a try its easy to do
BPT, G5M-R, BP26 Exintake swap + Fidanza cam gear, NSRT4 FMIC + 2.5" piping, HKS SSQV BOV, Exedy clutch, 3" downpipe + 2" all the way back, Aspire brake swap, KYB GR-2 & FMS coil spring , FMS EURO body kit + Carbon fiber hood, Falcon RTX 15X6½ + Toyo proxes T1R 195/45R15 -
its just two 10mm nuts on the inside and a plastic clip that holds the actuator rod - but be careful when you disconnect this becasue they break easy.
91 L - modified to SLX- "Tin Can Project"
http://www.cardomain.com/ride/2850897
92 GL - parts car
97 aspire - parts car
87 323 DX - daily driver
Visit My Store - New Products available!
http://www.cafepress.com/tunner
Car enthusiasts will respect all makes and models that preform.
Brand enthusiasts are the root of all problems in the car community.Comment
-
stripped the door parts from the tracer tonight and will be tring them in the festiva tomorrow, if they go I will post some pics...
One neat thing was there is a bracket behind the driver side door handle that has an activation switch mounted to it, so I can either hook that into a relay for the dome light or an alarm trip... so did the door kei, but I didnt bother to grab that.
Are the spindles front & rear swappable also? What are they compared to?Comment
-
EDIT:
According to a few searches, the tie rod ends are the same as the Festiva 88-93, CAPRI 94-91, and TRACER 89-87,
SO it looks like I am gonna look into grabbing the suspension too.Comment
-
wow i just found out something cool. i didn't know what a tracer was so i looked it up on google and it happens to be a ford laser/mazda 323. ha, learned something new today.Comment
-
anyone know if any chrome door handels off of somthing else will fit?
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
The tracer handles are chrome inside and out... I don't have answers about fitment yet, Festiva had to stay over night at the inspection place, his testing equipment failed. I will post up once I get it home.Comment
-
I know someone has them on their car - I've seen them before but I cant remember what they were off ofOriginally posted by sasquatch View Post
91 L - modified to SLX- "Tin Can Project"
http://www.cardomain.com/ride/2850897
92 GL - parts car
97 aspire - parts car
87 323 DX - daily driver
Visit My Store - New Products available!
http://www.cafepress.com/tunner
Car enthusiasts will respect all makes and models that preform.
Brand enthusiasts are the root of all problems in the car community.Comment
-
are you thinking of festymicks car? he had his stock ones chromed... i asked lol....
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
inside ones are a perfect fit, just like the map light, but no love on the outside door handle, not even close to making them work without some body work.Comment
Comment