PT Cruiser dash

[bravekozak]

Has anyone tried to install a complete dash from another vehicle? I was at the junk yard the other day and eyeballed a PT cruiser dash. It may have slightly more curve to it at the windshield, but is almost on the money on the width.
I took measurements of the Festiva dash. I will check the other two PT cruisers for their dimensions and let you know.

[25Horseplay]

That would be interesting

[ejp2fast]

beyond interesting!!!! that'd be colossal! although i don't like the pt dash in a pt- it'd be cool in a festy!

[Festiva_tunner]

maybe the one outta the 2002s

[getnpsi]

It would be an interesting one, but chances are none of the voltages would be the same so splicing wouldn't make them work. You can add a vss to your cable but i bet the ecu tells the speedo to work, not a straight signal off a vss.

I would stand behind a 2.4T swap with the dash however

[wybnrml]

That would be interesting

X2 You would have the only one thats for sure.

[bravekozak]

mini cooper dash

Do you think the Cooper dash is ugly?

http://z.about.com/d/cars/1/0/y/I/1/ag_08clubman_dash.jpg

I am planning on black carpet and black door fabric to match my black Tiburon leather seats.

Speaking of Tiburons, how about a Tiburon dash?

http://z.about.com/d/cars/1/0/T/Y/hma_07tiburon_dash.jpg

Maybe I'll just measure up the PT cruiser dash.

http://www.mp3car.com/vbulletin/attachments/show-off-your-project/20193d1128616198-pt-cruiser-integrated-dash-install-entire-console.jpg

[JPT]

Do you think the Cooper dash is ugly?

http://z.about.com/d/cars/1/0/y/I/1/...ubman_dash.jpg

That's just weird looking

I am planning on black carpet and black door fabric to match my black Tiburon leather seats.

Speaking of Tiburons, how about a Tiburon dash?

http://z.about.com/d/cars/1/0/T/Y/hma_07tiburon_dash.jpg

Maybe I'll just measure up the PT cruiser dash.

http://www.mp3car.com/vbulletin/atta...re-console.jpg

I'd do either of the other two.

I've been reading your posts. You REALLY need to post some pics of your car!

[Damkid]

The only dash i've ever considered swapping is the 88-89 323 dash, that looks to be a dam close bolt in

[wybnrml]

The Mini dash needs to stay in a Mini, the Tiburon and Pt dash would probably be alright.

[drddan]

^ x2

[Festiva_tunner]

The Mini dash needs to stay in a Mini, the Tiburon and Pt dash would probably be alright.

At least that mini dash does - I would like to see an older mini dash swaped I think that would look sharp

[eurotiva]

I think if your gonna go thru all the trouble...........just make your own dash. My .02c

[Festiva_tunner]

^ x2

[bravekozak]

measured

I measured the width of the PT cruiser dash today from A- pillar to A-pillar, and found it to be exactly the same as the Festiva. The problem will be with the window curvature. I will have to make a template to determine if I should buy it or not.
I did win a full set of Mini Cooper visors off of the bay, yesterday. Lighted even. I hope they fit. If not, I will just relist them. I think they are the only ones that are small enough not to hit the mirror.