Civic lights??!

[maxsideburn]

Check out this link

http://www.cardomain.com/ride/2225609

Anyone know how hard it would be to mount these lights on an Aspire?

[ericsmith32]

I was wondering the same thing.. doesn't look like he had to modify the grille or hood.

[maxsideburn]

if these are even close to being a direct fit it could be friggin awesome.

I don't know how to get in touch with the guy.

[aithanmier]

your tellin me! wow those look slick. i was gonna try to mount some bi xenon projectors in the stock housing but if that would be easier i'm all for it.

[ericsmith32]

The way they look from ebay pictures the headlights on the bottom should snap into something similiar to how the side markers are setup, the top has two brackets. Comparing the pictures the aspire's are completely curved the civic's are little different.. hard to describe... but close enough nobody would know unless you tell them. So who's going to be the first to buy some projectors and figure it out.. being civic lights they're some what cheap .. unfornately i'm broke so that leaves me out.

[Andrew]

The way they look from ebay pictures the headlights on the bottom should snap into something similiar to how the side markers are setup, the top has two brackets. Comparing the pictures the aspire's are completely curved the civic's are little different.. hard to describe... but close enough nobody would know unless you tell them. So who's going to be the first to buy some projectors and figure it out.. being civic lights they're some what cheap .. unfornately i'm broke so that leaves me out.

wouldn't testing it out with a pair of 95 civic junk yard lights work?

[ericsmith32]

Yeah are lucky enough to have cars newer than 95 in your pick n pull? All of the decent newer cars never make it to ours.

[nautical_lifens]

Those headlights are almost direct bolt ins. The only problem with them is the used 2 bulbs (highbeam and lowbeam) so you have to get a head light with the conversion from single to 2 bulbs. Installation is super simple just a couple holes drill and a little figuring and there in. I haven't done this yet but i have been planing it for almost 6 months. just need money

[ericsmith32]

Is there difference between the 4dr and 2dr headlights? Ebay has a listing for both.. although I don't see a difference between the two.

[aithanmier]

awesome. i'm on it after i get my income tax refund. lots of work getting done. some drop springs, some wheels, might even drop in a certain engine thats been hanging around for awhile.

[maxsideburn]

anyone know if the 1pc ones will fit? Some of them are two seperate pieces, a headlight and a turn signal, but some are all one big piece. Anybody know if they will fit?

[EVOGUN]

Looks like one piece for sure. The JDM ones are one piece. The one piece would be easier because you justs have to mount one housing.

Thanks :wink:

[maxsideburn]

ok, well I'm willing to give it a try. How exactly would I convert from one bulb to two though?

[Andrew]

ok, well I'm willing to give it a try. How exactly would I convert from one bulb to two though?

i presume you'd just need to grab the right harnesses from somewhere and splice the wires.

AFAIK though those civic lights are all H3's which worries me because I can't do without my H4 bulbs as they're hids and very freaking expensive.

[maxsideburn]

I am willing to try this out and make a write up on it, but someone is going to have to give me some kind of explanation of the two-bulb thing. There has to be some way for me to just split it or something.

don't our cars use H3s from the factory anyway?