Tweet
Can you still get this seal NOS or aftermarket? want to pull the glass for painting ( looks better when done this way ) but most of the time you either destroy the glass or seal getting it out..
-
money pit
No spitters were I work, you swallow it all. The Company feels if you already have it in your mouth why waste it. -
not needed
You can carefully push out the glass from the inside. I did it with the hatch lying on the grass. I used a long piece of telephone wire in the groove to reinstall it. No damage at all. -
Might have to ease it out with the use of a hook tool or radiator hose removal tool.---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
I've managed to pull the rear glass out of my car without damaging the glass or seal
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?Comment
-
alright Ill give it a try. I have done the rope/ wire install trick on several carsmoney pit
No spitters were I work, you swallow it all. The Company feels if you already have it in your mouth why waste it.Comment
Comment