Gonna try to install my new guage cluster tomarrow. I know I saw a thread with pics on here. I even down loaded it. I can't find it anywhere. And YES I searched, & went thru about 60 pages , page by page. Will anyone direct me to the correct Subject/thread please.?
Announcement
Collapse
No announcement yet.
Tach Gauge Cluster Install.
Collapse
X
-
If its a factory Festiva tach cluster it is just plug and play. Pull the old one out and put the new one in. If I remember correctly, the only thing you have to do is move the speedo cable to the other side of the dash support, you'll know what I'm talking about when you pull the cluster out.'90 LX
-
Originally posted by wybnrml View PostIf its a factory Festiva tach cluster it is just plug and play. Pull the old one out and put the new one in. If I remember correctly, the only thing you have to do is move the speedo cable to the other side of the dash support, you'll know what I'm talking about when you pull the cluster out.-------------------------------------------------------------------------------------------
Nancy- 1.8L BP, aspire swap, g-trans
The Adventures of Nancy! Build Thread
-------------------------------------------------------------------------------------------
My Musica! Click me!
Comment
-
Don't forget to loosen the speedo cable from the tranny first(IIRC, 17 mm wrench/crescent wrench) or you'll have a hell of a time releasing the cable and electrical connects. Unless, you have tiny hands.'93 Blue 5spd 230K(down for clutch and overall maintanence)
'93 White B6 swap thanks to Skeeters Keeper
'92 Aqua parts Car
'93 Turquoise 5spd 137K
'90 White LX Thanks to FB71
"Your God of repentance will not save you.
Your holy ghost will not save you.
Your God plutonium will not save you.
In fact...
...You will not be saved!"
Prince of Darkness -1987
Comment
-
Originally posted by navdoc101 View PostNope, got short chubby fingers, & shot arms. Thanks for info on wrench, will same a little time searchin' for the correct one.ohsnap
88 festiva lx, 2.3 turbo rwd swap in progress
1999.5 f-350 4x4 7.3 gtp38r 5" exhaust ect.
R.i.p. 1990 Western Star 5964s 3406b 530whp (4.2mpg!)
00' western star flat top ex, 600hp 6nz 2250tq, 18918b, 3.55, full lockers, 6" straight pipes
03' gt, full termi swap 700+ whp build
sponsered by,
pam pam's junk, dayton OR.
Bob's ok tires, salem OR.
Clausen Truckin', keizer OR.
Comment
-
Originally posted by Pu241 View PostDon't forget to loosen the speedo cable from the tranny first(IIRC, 17 mm wrench/crescent wrench) or you'll have a hell of a time releasing the cable and electrical connects. Unless, you have tiny hands.
Comment
Comment