bit of an all rounder really - interior, exterior, etc.

[jawbraeka]

i have already ripped the aspire brake swap guide into the forums as i think it's pretty good

here is a link from the same source

http://www.clubprotege.com/wil/howto/

there are quite a few guides here that i think can be adaptable or at least give people some idea as it's all mazda/festiva/kia/familia related info (sorry if i missed a few models or incorrectly labelled a car to be on the list when it wasn't, but it's late.)

if anyone wants to suss out any info and make writeup threads.. go ahead

[jawbraeka]

there is also some notes from the publisher as well

In this section you will find various walk-throughs on installations of peformance items, as well as general maintenence. Hopefully using these How-To's will save you time and prevent you from messing up the install like I have done with so many things (springs, shifter, calipers). If you have a how-to that you'd like to submit, please email it to me at: groharlem@hotmail.com I will give full credit for your work (^_^)

Coming soon:

-Take Apart G-series transmission & swap bellhousing
-Remove transmission from car with engine still installed
-Install 01-03 Honda Civic Projector headlights into your MX-3
-Install a Mazdaspeed Protege 2-way (clutch-type) Limited-Slip differential, manufactured by Tochigi Fugi Sangyo into your G-series transmission.

i think there is also some good coming soons as well (as long as they are adaptable to festiva's )

there's an email address if anyone wants to try to follow it up.

[navdoc101]

Thanks!! I used to have that saved but lost it some how. Glad you found it!!!

[Tommychu]

I don't know if I'd take advice from someone who recommends installing scotch clips in an ignition system. Is a soldered tap splice really that hard to do? I never had a problem making them.

[jawbraeka]

I don't know if I'd take advice from someone who recommends installing scotch clips in an ignition system. Is a soldered tap splice really that hard to do? I never had a problem making them.

maybe replace the scotch clips with something else like real soldering skillz and heatshrink instead.. use the same technique as it seems sound but the fastener/method of fastening/soldering is mainly the issue here.