121 2pc. front bumper partss available

[F3BZ]

this is mainly for the 121 owners with the 2 pc. front bumpers. if you're missing the lower metal skirt or yours is beat up/rusty, 4GREEN still has the skirt and brackets and most of the hardware available. cheap too except for shipping.

lower skirt - part# KK198 52 900 - $62

bracket LH - part# KK198 50 090 - $16

bracket RH - part# KK198 50 080 - $16

[Festiva_Fred]

Want one of those... so bad! And a matching rear one.. much nicer than the U.S. spec "bookshelf" covers! haha they should have come this way, tucked up closer!

[jawbraeka]

looking over these fred i have stock festiva grille..

these look a lot more stealthy.. get these instead.

[FastOrBust]

Arrghh, I didn't fully read the title and thought there were going to be 121 grill/lights in here

[F3BZ]

i don't want you to go away dissapointed FastorBust. i was the only bidder on this new 88 grille on ebay germany 3 yrs. ago. bought it for about $17.00. you're crying i know but my tears were alot bigger when i got the bill from FedEx to get it here. i know a guy in germany who has a new white 89 121 grille FS but i passed just because of shipping cost.

[FastOrBust]

Re: 121 2pc. front bumper partss available

There is a grill and headlights for sale on a Australian site for 100, I don't want to know how much shipping would be.

Sent from my SAMSUNG-SGH-I777 using Tapatalk 2

[Safety Guy]

I didn't know 121s had different bumpers! Now I do!

Karl

[F3BZ]

it's weird how i missed noticing that too. i was always looking at prides and 121's for sale in the UK, AUS, and Germany Ebays for years before i noticed and even then i didn't notice untill i looked at a 121 brochure i had that showed a front close-up. some 121's in Australia have both styles. i don't know if the different provences down there have different safety regs that might explain that anomoly. the Mazda parts catalog calls these a "hard type" bumper cover and the U.S. style a "soft type" but now that i have both to compare i can't detect any diff in the deformability of either. what i like about the hard type is that installed together they will knock over 4" from the length of a festiva and knock about 45 lbs. off the weight at the extreme ends of the car. there are no impact reinforcement bars and styrofoam blocks. the rear cover just attaches to the rear sheet metal with screws. i like the tighter bobbed look it gives especially at the rear.

[DriverOne]

What I like most about the 121 bumper is that the lower half is modular. That means body kits for that car could have been as simple as a bolt-on, aggressive lower lip. Nice.

[Maikel]

You like it, I don't.. hmmmmmm
It's only front bumper wich has steelplate, rear bumber is "big" style -> all plastic, no metal skirt.

But still, ours 121 rear bumber might be smaller than US version.. banana time