Announcement
Collapse
No announcement yet.
Rear kyb strut Diameter??
Collapse
X
-
Thanks for takin your time to do that Bruce, but I’ve ordered the parts a little while ago and got the coilovers put on my car already. I went with the ultimate street suspension setup for the rear
-
Hello Tyler- I just got new KYBs GR2 gas,still in the boxes. (going stock on my '92).
Rears are 1 5/8 inch diameter = 38+ mm. Shaft is 1/2" diameter or 12+ mm.
Front s are 1.8" diameter = 45 mm. Shafts are about 18mm or just under 3/4 inch.
Hope that helps - Bruce
Leave a comment:
-
The original "advanced suspension" from many years ago used the shortened stock KYBs, but that has long been replaced by using the MK1 VW rear struts.
Leave a comment:
-
Ok well i am just a little excited about getting the parts I need, i jumped the gun on asking about this...
I’ve found out I am going to go with mikemonlio’s ultimate street suspension for the rear.
Just as a peek into my front suspension setup I have some adjustable koni cut a strut inserts. For which I am welding up some some strut sleeves with brackets to attach to the steering knuckle. Ordering the coilover kits and springs from southwest speed. Once I have those parts I can complete the front suspension and get started on my engine swap
i will start my build thread once I get all my parts
Leave a comment:
-
Rear kyb strut Diameter??
Im working on a complete custom suspension setup on the front, but the rear will be the same as advanceddynamix in advanced suspension mods
I will be posting a thread with pictures n all once I have all the parts and can get started
Im trying to find out what the Diameter of the Rear Kyb Excel-G Gr-2 festiva struts are.. to get the right sized coilover sleeve, searched a lot but havent been able to find out.
Hopefully someone here may know or be able to take a measurement, I know they are either 36mm or 1-5/8inch.
I want to order all the parts but I dont know this one thing
any help is appreciated
thanksTags: None
Leave a comment: