Rim and rubber.

[dragonslit]

Just blew the rubber on my 12's and would like to know wat size 4lug rim could i use??? Then whice rubber size?? Just can't tell these days ya know???

[dragonslit]

http://kansascity.craigslist.org/pts/1012452228.html

will this work????

[25Horseplay]

^^Those will not work. You need the bolt pattern to be 4x114.3mm or roughly 4x4 1/2"

[lanemeyer14]

Those also don't have tires

[dragonslit]

i can find rubbers for 13's just cant find one for a 12

[lanemeyer14]

Do the aspire swap and then you have more options

[dragonslit]

aspire swap???

[lanemeyer14]

Yeah, you swap the front and rear parts over to aspire parts and that opens up your options for a greater wheel selection. Instead of the festy 4x114.3 you'll have a 4x100 bolt pattern which is more common.

http://www.clubprotege.com/wil/howto/aspirebrakes.htm

[dragonslit]

righto thx man

[corbinh]

I bought some 12's off of tire rack last month..at my door 3 days later, might check them out if you are set on 12's.

[collegeboi]

Well best thing would just look for some 13s because now it seems that they are the lowest standard today. Easiest would to get them off a metro or any 323 before 89

[dragonslit]

a went to pick and pull and got 4 13 rims all with rubber but 2 r bad and now there rubbing a bit i think it was a p155/80/ r or somin like that.... any guesses on tire size i should use for less rubbing??????

[ejp2fast]

a went to pick and pull and got 4 13 rims all with rubber but 2 r bad and now there rubbing a bit i think it was a p155/80/ r or somin like that.... any guesses on tire size i should use for less rubbing??????

you may need some spacers to get the wheel out a little bit and farther from your strut, which is where you are hitting... what size 13's are they (Example 13x5" or 13x5.5").. also what are they off of? i ask b/c seeing what the offset is.