Tweet
Lines look well done! As with anything stainless. Sweet.......
-
Tim
'97 Aspire ST, UltraViolet Blue, 37k miles - New Storage Queen
'03 SVT Lightning, Dark Shadow Gray, 30k miles - Storage Queen 11 months/year
'95 SVT Aspire B3T, Green Mica, 75k miles - DD
'01 ZX-500R, Violet Pearl/Gray, 5400 miles - Storage Queen
'89 Suzuki FA50 Bright Red - Lake Transportation
Cardomain.com/id/aspiresvt
Previous Vehicles
'92 Festiva L "Sport" Green Mica
'92 Festiva GL Blue Pearl
'92 Capri XR2 Performance Red -
OMG! They are great! That was pretty numb of the shop operator not keeping a bend record. What does that amount to? About a 1/2 meg of computer storage.
How will you get the new lines routed behind the frame bracket (??) in the left corner of the engine bay where they come up from underneath the car.
I replaced mine but bypassed this routing and came closer to the center of the car then behind the steering rack up to the proportioning valve. Not as neat but so much easier. Almost impossible with the engine and tranny in.Comment
-
Those turned out awesome!!
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?Comment
-
correct
You are right. I should have done it with the engine and tranny out. I have to take out the brake booster and fuel filter bracket. The plastic snap-in support is right behind that bracket too. You have to be a surgeon. I removed all of the rusted bolts, chased and installed new flange bolts with anti-sieze compound. If I had wanted art, I should have also done the fuel lines and power steering lines, while I was at it.
Like I said, maybe if another one or two members made them do the same thing, they may decide to profile them. You would not believe how much inventory they had hanging on the walls of their warehouse. Since it is very light but fragile, it went from floor to ceiling of the factory. Guess how much they wanted for the professional double flanging kit. $350. I had to go outside for a few deep breaths of fresh air.Last edited by bravekozak; 08-04-2009, 08:38 PM.Comment
-
that looks sharp wish you woulda said something before he deleted them I'm sure we coulda pooled some money here to have the profile kept
91 L - modified to SLX- "Tin Can Project"
http://www.cardomain.com/ride/2850897
92 GL - parts car
97 aspire - parts car
87 323 DX - daily driver
Visit My Store - New Products available!
http://www.cafepress.com/tunner
Car enthusiasts will respect all makes and models that preform.
Brand enthusiasts are the root of all problems in the car community.Comment
-
rear lines installed
Now for the front. I have to take the steering column out to change the vacuum assist.Comment
-
that looks VERY nice
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
Of course, now you will have to upgrade the entire rest of the car to look as good as the brake lines...90 Festy (Larry)--B6M (Matt D. modified B6 head), header, 5-speed, Capri XR2 front brakes, many other little mods
09 Kia Rondo--a Festy on steroids!
You can avoid reality, but you can't avoid the consequences of avoiding reality--Ayn Rand
Disaster preparedness
Tragedy and Hope.....Infowars.com.....The Drudge Report.....Founding Fathers.info
Think for yourself.....question all authority.....re-evaluate everything you think you know. Red-pill yourself!
Comment
-
At least they will last long enough for you to strip the whole car down and repaint everything lol - they look sharp I'm envious your your lines now.Originally posted by TominMO View Post
91 L - modified to SLX- "Tin Can Project"
http://www.cardomain.com/ride/2850897
92 GL - parts car
97 aspire - parts car
87 323 DX - daily driver
Visit My Store - New Products available!
http://www.cafepress.com/tunner
Car enthusiasts will respect all makes and models that preform.
Brand enthusiasts are the root of all problems in the car community.Comment
-
Alright, you need to give us the exact info to this place because I want that too!!! I'll probably ask them for the fuel lines as well!Is that a Festiva that just passed me?!?!?!Comment
-
Nice!!~Nate
the keeper of a wonderful lil car, Skeeter.
Current cars:
91L "Skeeter" 170k, Aspire brakes, G15, BP, Advancedynamics coil overs, etc. My first love.
1990 Kawasaki Ninja 250 - my gas saver, 60+mpg - 40k
2004 MotoGuzzi Breva - my "longer range" bike - 17k
FOTY 2008 winner!Comment
-
Those brake lines are fantastic!---------------------------------------------------
The Jester - Midwest Festiva Inc., Missouri Chapter
---------------------------------------------------
BUILD'EM CHEAP, RUN'EM HARD, REPAIR'EM DAILY!
Comment
-
dot 5
I do not want my brake fluid to absorb water from the air and turn cloudy. I just bled my lines a week ago with silicone brake fluid. Here is a pic of the purple wonder. I will post another pic in a years time.Comment
-
I resurrected this thread for zoom. I forgot to take another pic of the brake fluid a year later. But I can tell you that it is just as clear two and a half years later. Silicone brake fluid does not absorb water at all.Comment
-
now you reminded me how bad i wanted these! Forgot all about them. My car is a roller now so it would be easy to get too!
Comment
Comment