Announcement

Collapse
No announcement yet.

1991 capri XR2 front brake swap.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wrongfulleaf
    replied
    Originally posted by chrisofna View Post
    It is, but apparently only those wheels. I can't fit Nissan 13s over them.
    This is very disappointing I was going to try to pull this swap off come spring time and my summer tires are going to be 14s but I was going to try and keep my stock wheels for winter time with some good snow tires. I was thinking about getting some 13s for winter but if I have to up to 14s minimum I think I am out Has anybody been about to fit 13s (besides the late 80s tracer)? Thanks and good info above ^^^

    Leave a comment:


  • chrisofna
    replied
    It is, but apparently only those wheels. I can't fit Nissan 13s over them.

    Leave a comment:


  • FestYboy
    replied
    Originally posted by hot4dl8ly View Post
    I found out about the wheels- the Tracer (1989) used these brakes with 13" wheels.
    you sure of that? if so, that's an awesome discovery!

    Leave a comment:


  • chrisofna
    replied
    Hopefully you can verify if the car needs to be lowered or not because that was the problem when I did my swap. the lower control arm wouldn't go into the frame because the spring was too long (stock suspension).

    Leave a comment:


  • hot4dl8ly
    replied
    I found out about the wheels- the Tracer (1989) used these brakes with 13" wheels.

    Leave a comment:


  • hot4dl8ly
    replied
    I have a question on the Capri brake swap. I know the stock 12" wheels are out. Can you use 13" wheels or do you need to go all the way to 14"?

    Leave a comment:


  • FestYboy
    replied
    actually, i'm not too sure of this... i would recomend it either way though.

    Leave a comment:


  • fastivaca
    replied
    Originally posted by MTBOX View Post
    I was wondering if you have to have your front end aligned after that also?
    Definitely.... yes!

    Leave a comment:


  • MTBOX
    replied
    Yes I do have the aspire LCA.I was wondering if you have to have your front end aligned after that also?

    Thanks FestYboy for the information.

    Leave a comment:


  • FestYboy
    replied
    don't have to touch the lines, just bend the locating pin out of the way.

    i take it you have the required aspire LCAs?

    Leave a comment:


  • MTBOX
    started a topic 1991 capri XR2 front brake swap.

    1991 capri XR2 front brake swap.

    I am getting ready to do this swap onto my 1991 festiva B6T and was wondering do the front brake lines fit the XR2 calipers or do I need the
    capri XR2 brake lines?
Working...
X