Tweet
I assume these wheels will fit a festiva with the aspire brake swap.
What say you ?
-
I assume these wheels will fit a festiva with the aspire brake swap.
What say you ?1991 Festiva " The Doomer" 8vB6 Azzfire brake swap complete ! -
These are off an '88 Mazda so should fit a Festiva with stock brakes.Ian
Calgary AB, Canada
93 L B6T: June 2016 FOTM
59 Austin Healey "Bugeye" Sprite
"It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)
Link to the "Road Trip Starting Points" page of my Econobox Café blog -
I'm not positive, but I believe all the 323 had the same bolt pattern as the Aspire (4x100mm). The best way to find out is to ask the guy what the bolt pattern is on the wheels. Many small FWD cars have the 4x100mm bolt pattern, but the festiva has the much less common 4x114.3mm pattern. If those are 4x114.3mm, then you are good to go with the stock festiva setup, but if they are 4x100mm you'll have to do the brake swap first. BTW, those rims look sweet, use them if ya can.No festiva for me ATM...Comment
Comment