couple of questions.

[93babyblue]

1. how hard is it to do a aspire suspension swap?

2. where can i get larger rims and what sizes can i use if i dont raise the car?

3. what mirrors can i use i dont have a power on e on the driver side and i have no mirror on the pass?



thanks for any answers

[marinepolice03]

1. not hard at all
2. there is a lot of cars that have the 4x114.3 pattern
3. i have a manual pass. side mirror if you want to buy it. i know there are a couple cars that you can use the power mirrors from with some mods.

[bravekozak]

1. It is an easy bolt in. Just get the parts and take it to any garage if you don't have the tools.

2. I buy all my rims at the junkyard. I never buy new. I recommend everyone get theirs there too.

3. The power mirror wiring is behind the largest blank plate on the left bank of switches.
You can post a [WTB] wanted to buy for either a set of power mirrors and a switch or a passenger manual mirror

[JPT]

If you're doing the Aspire swap, the bolt pattern you want is 4x100. Not 4x114.3

There are lots of rims with this pattern.

[marinepolice03]

i was thinking about the stock size bolt pattern, oops

[93babyblue]

thank you for the answers... do you happen to know what vehicles have the rims i need? and how much would u want for the passenger mirrior? and last thing do i buy the aspire suspension new or junk yard? thanks

[JPT]

You'll be going to the junkyard for the Aspire pieces. A good tip is to read this guide.

http://www.clubprotege.com/wil/howto/aspirebrakes.htm

The link below has a list of wheels and their bolt patterns. Halfway down is 4x100

http://www.fordfestiva.com/forums/showthread.php?t=90

...and welcome to the site.

[93babyblue]

thank you... i have one more question how do i post pictures? i took some just dont know how to upload them