front Sway bar bushing

[71Montego]

I finally got around to doing the 2nd side of my control arm bushing on myfestiva. I did not find out you need 2 until later. I got the moog for the control arms and decided to do the Energy Suspention ones for the sway bar to frame. I got the ones with the brackets and Zerk fittings. I cut the bushings to size on the bench sander and drilled and tapped my brackets for the zerks. I reused my festiva ones as it was stated, they are much stronger.
Noticable difference.
I suggest before you do stiffer springs and a strut bar you do this 1st. Then go from there. So far I did the FMS springs, KYB K2 struts and the sway bar bushings and the Home Depot/ lowes threaded rod sway bar. :

[Aaronbrook37]

Awesome... would love to see some pictures of your work. Bushings are definitely on my to do list. Hope you're enjoying the threaded rod sway bar... it's easily one of my favourite cheap mods!

[71Montego]

I have to post thru a acct or something right. I new at this stuff

[71Montego]

[71Montego]