Tweet
will front rio hub fit in aspire spindle ?
thanks in advance
-mike
thanks in advance
-mike
-
Slainte!
-Mike
91 Festiva L 1.3l 5spd -
Last edited by JPT; 10-30-2011, 03:48 PM.Festiva: Because even my dog can build a Honda.
---------------------------------------------------------------------------
'90 L. B8ME/Kia Rio 5 speed. Rio/Aspire suspension swap. :-D
'81 Mustang. Inline 6, Automatic.
'95 Eagle Summit Wagon. 4G64 Powered.
-
Can't comment on your situation but Kia did retain the asinine business of 21 different pre-load bearing spacers on their own cars after they parted from Ford/Mazda, so maybe the advice you're getting is good. Should this be the case (for Aspire (100 mm wheel stud center) swappers) please let the rest of us know. And good luck!Comment
-
^ This is why you don't ever want to mix up or (God forbid) lose the spacers when you do your hubs.
As for substituting Rio hubs for Aspire ones, I don't know if the spacers will work for the Aspire/Rio combo.Last edited by JPT; 10-30-2011, 04:45 PM.Festiva: Because even my dog can build a Honda.
---------------------------------------------------------------------------
'90 L. B8ME/Kia Rio 5 speed. Rio/Aspire suspension swap. :-D
'81 Mustang. Inline 6, Automatic.
'95 Eagle Summit Wagon. 4G64 Powered.Comment
-
the knuckle casting determines the spacer used, not the hub itself. so if you use quality replacement bearings, i see no reason why the hubs can't interchange.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
Thanks for assistance. It is next to impossible to search the forums from a cell phone. It does appear they will swap. I'll post if they don't.Slainte!
-Mike
91 Festiva L 1.3l 5spdComment
Comment