Tweet
The captured bolt broke out of its cage on the passenger side of my Festiva, so I replaced it with a flange nut with a washer. Now I have a problem: every once and a while I have to tighten up the bolt again. Is there any way to prevent this? It's getting quite annoying not having consistent handling properties.
-
Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle. -
Maybe some Loctite?
More torque when tightening?
You are using proper hardened steel bolt and nuts, right? (Grade 10.8 or over, I think.)
Karl'93GL "Prettystiva" ticking B3 and 5 speed, backup DD; full swaps in spring!
'91L "AquaMutt" my '91L; B6 swap/5 speed & Aspire brakes, DD/work car
'92L "Twinstiva" 5sp, salvage titled, waiting for repairs...
'93GL "Luxstiva," '94 B6 engine & ATX; needs overhauled
'89L "Muttstiva," now a storage bin, future trailer project -
did you use a lockwasher? needs to be a lockwasher and it helps to have the flanged nut to have the serations on the mating surface to lock into the washer as well. no locktite should be needed.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
no, didn't use a lockwasher, I'll try that next. The flanged nut has the serrations on it and it's a 10.8 grade nut.Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.Comment
-
^ yeah, needs a lock washer. also use a lock washer on the top of the bolt as well if you can.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
Last edited by drddan; 12-08-2011, 06:00 PM.Dan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647Comment
-
Make sure the threads are clean too.91 Festiva BP Autocross/Track/Rallycross hopeful
14 C7 Z51
Comment
-
Should I put a lock washer under the nut head or the bolt head?Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.Comment
-
BOTH if you can. more important is a lockwasher at the NUT though.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
Comment