Mazda 2 stabilizer bar bushings.

[RhodeStiva]

http://www.jegs.com/p/Energy-Suspension/Energy-Suspension-Sway-Bar-Bushings/743968/10002/-1

Looks like these would fit? Has any one tried these yet?

[RhodeStiva]

http://www.jcwhitney.com/polyurethane-sway-bar-bushings/p2005918.jcwx?skuId=234319&filterid=c11320d618u0j1

[Team Lightning]

You have to lock them into place due to the slotted holes. A large washer might work on each slot. If it moves it can change your alignment.
I sanded mine to fit the Aspire brackets on my sway bar.

[M3NTAL]

WHY DO PEOPLE STRESS ABOUT THIS ??? Euro an me run this style and he has autocrossed his car and drag raced his car VERY HARD!!!!! RUN A ALUMINUM PLATE UNDER THE BRACKET DRILL TWO HOLES AND TIGHTEN UP DONE!

Sorry but this has been beaten to death. Like 2742826788626171 times it works for me and Greg and we don't drive our cars with a purse on our shoulder!!! Rant off.

[RhodeStiva]

BINGO! good idea m3ntal

[91blufestiva]

WHY DO PEOPLE STRESS ABOUT THIS ??? Euro an me run this style and he has autocrossed his car and drag raced his car VERY HARD!!!!! RUN A ALUMINUM PLATE UNDER THE BRACKET DRILL TWO HOLES AND TIGHTEN UP DONE!

Sorry but this has been beaten to death. Like 2742826788626171 times it works for me and Greg and we don't drive our cars with a purse on our shoulder!!! Rant off.

Which bracket do you use then? aspire/festy, or the one that comes with the kit? Also, how thick of plate?

[M3NTAL]

Mazda 2 stabilizer bar bushings.

Make your own plate and drill two holes. I used some scrap that euro had laying around

[Movin]

Heck, even wood makes a good bushing!

[skimsucka]

The little 1/8 inch aluminum or metal plates anyone here wants , are simply 2 inches by 4 inches exactly with 2, 1/4 inch holes at each end. you can remove one sway bar bracket and trace it on some scrap metal and with a hack saw and one drill bit your done. A band saw and a drill press makes it even easier ! then you can get the generic 18$ or whatever grease-able ENergy SUS bushings and.......................... ENJOY

[91blufestiva]

Yes I get that. But do you guys use the festiva bracket that holds the bushing on, or the one that comes with the energy suspension bushings?

[M3NTAL]

There's pictures in euro's race garage thread.

[william]

Use the ones that itcome with the bushings they will not slide with the aluminum under them.i have had this set up for 10,000 miles with hard driving.
And trust me i was sceptical when i first did this after reading it worked on here.
But they are great.