Studs - ice

[jason_]

Good idea. Shameful I slobbered bead sealer to make sure they wouldn't leak.

I have poked in stems from the outside. Takes some work.

Sent from my rooted HTC Supersonic using Tapatalk 2 Pro

[nitrofarm]

Punch a hole in the tread where the valve stem is. Rotate to the top. Insert a bleed pipe(piece of brake line?) into the hole, and fill through the stem? Plug the hole when finished?

This is very close,but you want to use a hollow needle (like hypodermic) as the bleeder. Then just use a rope plug in the tiny hole. But you keep the needle inserted as you fill.But I wouldn't recommend doing this on a street car. Especially since you have studded snow tires. Its not required and makes the tires very heavy....

[jason_]

makes the tires very heavy....

That's the goal as mentioned previously .


Sent from my rooted HTC Supersonic using Tapatalk 2 Pro