Thinking these wheels will work just want second opinion and good tire size

[NateHertz]

image.jpg

So if I'm reading this right they'll work with stock bolt pattern or aspire swaps correct? Also I'd love to have that sptreched tire look but was wondering if this was the way to go... Thanks in advance. Hope it's okay to ask

[TominMO]

Those should work fine.

[Dragonhealer]

Hey, cool find! fitting both wheel patterns, Aspire front and keep the Festiva rear set-up! Neat!

[NateHertz]

Thinking they might be too skinny but only other ones I found were 6 or 7" and they are 14's... I dunno gunna have to decide

[Bert]

They'll do either Festy OEM or Aspire swaps and rim width is OK but what of the 'offset' and the hub size? Hub centric is really nice to have when you're forking over serious money to play this game. Also rubbing (wheel wells and/or shocks/springs interference) is the bane of all naive, nonchalant or head-long rim and tire swappers due to rim offset (which varies considerably) and easiest way around this (if you've got Aspire fixins on the car already) is to seek out early Kia Rio alloys. At a U-Pull these will be really cheap and tire shop clearance bin Nokian 155/65-14s (in my case) were the best thing since sliced bread in keeping with OEM height and clearance to original, not rubbing at all, and achieving a highway-exotic ride well away from that of 'boat trailer' tires that I was used to.

[Advancedynamix]

Yup. They fit.
You won't get any commonly available automotive tire to stretch on a 5.5" rim though. If you want a little stretch go 14x7 with a 165/50-14 tire. Good luck finding 14x7 rims though in a 36mm offset with a dual pattern.

[sketchman]

^Konig Lightnings work and are close to if not that wide.

These will work with no spacers with stretched tires.

http://www.konigwheels.com/Konig-Home/Konig-Passenger-Wheels/LIGHTNING-BLACK

[NateHertz]

Sketchman what size tires would you run on those and your talking about the 14x6.5 right? Thank you all for the help also plan on building my coilover a outa gr2 struts 10" front springs and 8" rear springs hope I could still run without having to roll or trim? I like those konigs and in the process of making my car black

[Advancedynamix]

^Konig Lightnings work and are close to if not that wide.

These will work with no spacers with stretched tires.

http://www.konigwheels.com/Konig-Home/Konig-Passenger-Wheels/LIGHTNING-BLACK

Good find sketch!

[sketchman]

I bought them a couple years ago and still have them on my car painted flat black.

I've not lowered the car yet, but I would bet you could do it without rolling fenders if you're also stretching tires.

These are 165/60/14 on the 14x6.5 Konig wheels.

[NateHertz]

Nice how much the wheels n tires run you and what bolt pattern you get

[NateHertz]

And do you have a pic of your car with them on it?

[sketchman]

Not really sure at this point how much they cost. I use tireseasy.com because they always have the oddball sizes we need, and the 14x6.5 comes with dual pattern from discounttire.com. For both Aspire/Rio or stock Festiva.

Pic.

[sketchman]

Wheels.

[NateHertz]

Those say 14x6 and out of stock thank you for all the help thow I have the image I want for the car in my head just need to work my ass off and put it all together.