Wheel spacers

[Pzl8domin8]

Hey guys, I have 175/65R14 82H wheels that came with the car.
The space between the spring and tire is almost non existent.. What kind of wheel spacers can I use for the car? It's a 91


Sent from my iPad using Tapatalk

[Advancedynamix]

You won't need anything real thick. I'd just order some 4x114.3 1/4" spacers with at least a 60mm centerbore from ebay. Hint: 7mm is equivalent to 1/4".

[FestYboy]

Better yet, the proper sized tire will fix the problem properly.

[scitzz]

If they are not rubbing, why space them? Almost touching isn't touching, right?

[firebush357]

If they are not rubbing, why space them? Almost touching isn't touching, right?

I'm Not Touching You~:boxing:~I'm Not Touching You!

[theFORDdriver]

If they are not rubbing, why space them? Almost touching isn't touching, right?

I was also asked this question several times when decided to get the coil spring spacer in. And apparently, I put it to be on the safe side. Because before I installed that spring spacer (the car was new for me then) it was uncomfortable for me to drive knowing, that there is a possibility that tire may touch the spring. So in my case, and from my experience, I would still install a spacer here.
:ia:

[theFORDdriver]

""I was also asked this question several times when decided to get the coil spring spacer in. ""

Today came across my invoice for those spring spacers I installed.

[scitzz]

I'm Not Touching You~:boxing:~I'm Not Touching You!

BAHAHAHAHAHA!

I was also asked this question several times when decided to get the coil spring spacer in. And apparently, I put it to be on the safe side. Because before I installed that spring spacer (the car was new for me then) it was uncomfortable for me to drive knowing, that there is a possibility that tire may touch the spring. So in my case, and from my experience, I would still install a spacer here.
:ia:

Not touching isn't touching

Yeah, really, I get ya, but especially the rear, the only to make it touch is a catastrophe, right?