Announcement

Collapse
No announcement yet.

My B6T project

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Not yet.....I had a long day with school stuff and didn't get home until after 8. Hopefully tomorrow, although I might be working on that bike that I picked up. I will let you know when it put it in.......any tricks I should know about?
    No longer a festiva owner

    Comment


    • #62
      ok, give me a call if anything.. i dont mind!

      Comment


      • #63
        could you post more pics of the vacuum hoses and such? iacv hookups too.
        OW!!

        Comment


        • #64
          I think that I am going to change the title of this thing to worlds slowest B6T swap....ever.

          I was hoping to get more done, but I only did a few things today.

          I basically mocked up where the intercooler and radiator are going to sit and cut and worked some hoses into place so that all I need to due is mount them up and put the hoses on. I used a piece of metal coat hanger and bent it to the shape i needed for the radiator hoses and then went to the store to find some that looked close.....worked on the first visit.

          I am a little less excited about the intercooler piping....does anybody have any advice or pictures using the probe intercooler? I cut some of the old intercooler hoses I had, but it seems really tight?

          Well, all that is left is the wiring and i should be good to go? Well at least to drive.
          No longer a festiva owner

          Comment


          • #65
            Had some time today to work on the car....tried to get some wiring done, but got frustrated and started messing with the front bumper and the lip I got from the local Pull and Pay.

            Started with a grey bumper and here is what I ended with.....





            Sorry, couldn't move the car to get a better picture
            No longer a festiva owner

            Comment


            • #66
              what kinda front lip is that ???

              Comment


              • #67
                Looks like an S10 or a shortened Firebird lip.
                Current cars:

                1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
                1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
                2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
                2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.

                Comment


                • #68
                  how much are the adapter mounts???
                  1992 white L, Bp, American racing 13's, stock trans.
                  1991 White L, BP/F5MR, protege header, full aspire swap with gr2's, seats, and sway bar, 15" konig's, short throw, escort console.
                  1991 blue L, 5 speed.
                  1988 red L-plus-all stock.

                  Comment


                  • #69
                    It came off a mid 90's Blazer......I trimmed it up a bit and it is currently zip tied in place. I will try to take some more picture later after the car is moved away from the house. I picked this lip because it already had the holes for driving lamps, and because it is close to the same size as the Festiva bumper
                    No longer a festiva owner

                    Comment


                    • #70
                      get er done!

                      Comment


                      • #71
                        awesome!!! waiting for the pics!!!!!

                        Comment

                        Working...
                        X