Eurotiva BP/RT build

[TominMO]

I'm always looking for the "next" motor. If I can get this car into the 12's I might leave it alone

Nitrous? Or just the Megasquirt?

[Gforcefd]

Zetech should be your next motor, I think a couple years even had VVT? I would love to do that swap.

I wish someone would break into the 11's in a festiva, that would be awesome (a FWD festiva I mean).

[eurotiva]

Nitrous? Or just the Megasquirt?

Zetech should be your next motor, I think a couple years even had VVT? I would love to do that swap.

I wish someone would break into the 11's in a festiva, that would be awesome (a FWD festiva I mean).

Gonna try megasquirt First if the place will ship it (15 days and waiting) If that doesn't work I'll spray it. But I think Casper is gonna be the candidate to go faster.

I wanna go into the 11's but I'm sure grocerygetter will get there first.

[resuwrecked]

You won't need juice to get 12's, just a set of big injectors to be controlled by MS

[eurotiva]

You won't need juice to get 12's, just a set of big injectors to be controlled by MS

That's what I'm thinking after tonight. 13.44 on nitto drag radials.

[eurotiva]

Update.............

Today I received my Megasquirt I'll keep updating as it gets installed.

Also I got my UNDERSEAT TRAY!!!!!!!!!!!!!!!! Thanks to todd00. I'll post pics as soon as i get my seat situation worked out. Also he sent me a dash clock. Whatta guy

And some vids from this week.

Saleen mustang




Dodge Caliber SRT-4



Flying Solo................





Another mustang gt. ...........................







Honduh................





Another mustang



Mid engine honda with a big turbo.........Hogun?



Another mustang









Hope you enjoy

[Amos]

Awesome.

My buddy that's all "hurr hurr mustangs are soo good. Better than what your tiny car could ever be!" will enjoy these

[lanemeyer14]

Dats a purdy fast fiesta ya got dere boy!

[Claude]

thats so nice to see..

[wybnrml]

I love watching all those Mustangs get beat by a Festiva.:laughing6: Or as the announcer would say, Fiesta.

[Gforcefd]

I agree very nice fiesta! It is going to be nasty with the megasquirt. Are you putting the flat shift option in or any kind of boost control? I know the PNP unit I bought from Clubprotege has flatshift but I won't mess with it till I get the basics down of tuning it. Good luck!

[resuwrecked]

I'll bring this here from the fastest festiva's proof thread so that I don't help the derailment of relevance lol.

WooT WooT....RuN YoUr cAr !!!! I know it's fast !




Tom I'm by no means suggesting that you do this but I'm getting away with 8 degrees BTDC on 93 octane with no ping. If I remember correct yours is 3 or so degrees. Mine gets warm too because I run the a/c everyday. Still no ping.

I finally checked my timing with a light today. Never did ever since I did the bp swap just always did it by ear/feel. Well it turns out im at 18* base timing with 3/4* taken out for every lb with the BTM. I still have room to turn down the retard since I have never encountered ping. I guess my "tune" if thats what you want to call it is modest and safe. Time to push it a little... how many psi are you givin it now greg.

[eurotiva]

Still 10 lbs. I'm gonna maybe just maybe try 12 this weekend.

Thinking about spraying it on the top end. I wanna be in the top 5

And I talked to a few people on clubprotege and they are pushing 17/18 degrees with 93 octane N/A tho. I think I can get away with a little more.

[resuwrecked]

And I talked to a few people on clubprotege and they are pushing 17/18 degrees with 93 octane N/A tho.

Cool, thanks for that little bit of info. It seemed like a lot of timing and I was wondering what people typically ran.

[eurotiva]

Yeah i searched for about 7 hours the other day and have emailed back and forth with the MS guy probably 40 times in the last 2 days. The bp guys on 87oct. are running 10-12*, and 93oct. 17-18*

On another note my wife bought me a go-pro camera today !!!! Mad drag videos coming soon.

And a guy I called about a month ago that has a mill/drill/lathe called and said he'd even take payments for it because I seemed like a good honest guy. I'm picking it up tomorrow. It's an Enco. I'll be making parts soon.