Another SHOGUN in the werks

[kumalaba]

we are not worthy!! that is soooo baaaad!

[walth]

is your conversion going to have heat?

and how did you route the brake lines there in the front? relocate the splitter block? or maybe I just can't see it...

[PhoenixSHO]

is your conversion going to have heat?

and how did you route the brake lines there in the front? relocate the splitter block? or maybe I just can't see it...

Yes heat is already there. But only when the thermostat will open. Its better then nothing , and that thing wont see a single spec of snow.

For the brake lines , the block is gone for now , both master cyl lines goes inside. The front one gets a manual line-lock near the shifter then back out under the hood with a Y fitting (the proper Y double flared). The rear line will gey a Y too.

Since the rear SHO brakes needs full braking power , I ditched the block. For now.

Some braking tests will have to be performed before calling it a day.

[PhoenixSHO]

Well for 100$ you get this. And it goes in the shogun.






Some details

Borgwarner/ISHI RHC6 turbocharger.

Very high quality turbo featuring T3 compatible oil drain and turbine flange, polished Compressor housing, bigger shaft than equivalent garrett turbos, double compressor seal and sturdy internals such as bolted-Down 360deg. Thrust plate and an integrated backplate.

Compressor wheel: 50.3 / 70 mm 52 trim
compressor housing: 0.7 a/r

center section: oil cooled journal bearings

Turbine wheel: 64.6 /62.1 mm 77 trim
Turbine housing: 0.7 a/r

[anomoly40]

Uh-oh.

[FB71]

ok, you're beginning to make ME want to build a Shogun...

[kellen302]

Better start buying tires, I'm going to invest in tirerack now, lol

[Damkid]

Well there goes my plan for trying to be the fastest festiva :lol:

[Rocketman]

Well there goes my plan for trying to be the fastest festiva :lol:

I told ya once, and I'll tell ya again: Your engine's at the wrong end of the car!!

TurboSHOGUN. Love it.

edit: Would that make it a SHOTGUN? SHO-Turbo? lololol

[FB71]

SHOTGUN!!!! I love it!!!!

[kellen302]

Equally as uncontrollable and difficult to use indoors

[PhoenixSHO]

SHOTGUN!!!! I love it!!!!

me too

haha

[Kraig]

Blowgun......?

[Aaronbrook37]

http://www.youtube.com/watch?v=OG_6CopW9GQ

This is the song in my head when I read this build thread... every. single. time. Fantastic work, my friend. Once I'm back from overseas, if I come back to settle in Ottawa... I'll nip over for the weekend and check out what you got going on.

PS - a little shameless self-promotion. You'll find my compressor map tool particularly useful with that turbo! Link in the sig.

[PhoenixSHO]

http://www.youtube.com/watch?v=OG_6CopW9GQ

This is the song in my head when I read this build thread... every. single. time. Fantastic work, my friend. Once I'm back from overseas, if I come back to settle in Ottawa... I'll nip over for the weekend and check out what you got going on.

PS - a little shameless self-promotion. You'll find my compressor map tool particularly useful with that turbo! Link in the sig.

Umm , that tool looks pretty much on the money.

6psi = 300hp , thats about what another guy on the shoforum got , and thats without ANY tuner , bolt on the turbo and enjoy.

The problem is that the injectors tops out at 300. If you want more , then you need injectors , pump and a tuner/chip.