Announcement

Collapse
No announcement yet.

sasquatch's quest for MORE POWER!!!!!!! its turbo time....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • coppied from mission raceway web site...

    Our next scheduled drag race is on Friday, June 29th -
    Mopac Performance Street Legal #10. Gates open at 4:30pm, racing starts at 5:30pm and goes until about 11pm.

    ill probably show up at about 5pm or so... hopefully not many cars show up to race so i can get lots of passes in

    oooo and dont forget the 60d


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment


    • I'm gonna guess at it.....

      13.1~13.2 @ 106 mph....street tires
      -Greg
      Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
      BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
      Redneck Engineer
      FOTY - '09
      5x Festiva Madness Attendee...FM 3,4,5,6,8
      http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
      http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

      Comment


      • Originally posted by eurotiva View Post
        I'm gonna guess at it.....

        13.1~13.2 @ 106 mph....street tires
        thats about what my guess is.... mid to low 13's @ about 100ish IF i can drive it good lol... its been a while since i have been on the track lol...


        Mike, AKA the sasquatch
        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

        Comment


        • Originally posted by sasquatch View Post
          coppied from mission raceway web site...

          Our next scheduled drag race is on Friday, June 29th -
          Mopac Performance Street Legal #10. Gates open at 4:30pm, racing starts at 5:30pm and goes until about 11pm.

          ill probably show up at about 5pm or so... hopefully not many cars show up to race so i can get lots of passes in

          oooo and dont forget the 60d
          Sounds good! I will definitely bring the camera!

          How much does it cost to get in as part of your "crew", lol......

          Comment


          • Nevermind, I found out from the site that it costs $5.00 for spec/crew...... It would be cool if a few other local guys come out too! Short notice though, lol.....

            Comment


            • ok so i forgot to bring the memory card for the cam lol.... but thank **** darlo showed up with a camera of there would have been no vids or pics... i gotta get the files from him so i can upload them or he can post them up thats fine...

              i managed to get 13.8 @ 103 but traction is a very big problem... i gotta work on that, and i have a few ideas that im gonna try when i get more time and money...

              pics and vids comming tomorrow...


              Mike, AKA the sasquatch
              1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

              Comment


              • this vid is a low 14 sec pass, the car later went 13.8@103 that night... traction is a very big problem, as you can see im not launching very hard and soft s...


                Mike, AKA the sasquatch
                1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                Comment


                • Awesome Mike.

                  I need to get an incar of mine. I'm launching at 5k and never letting off during shifts. LoL
                  -Greg
                  Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
                  BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
                  Redneck Engineer
                  FOTY - '09
                  5x Festiva Madness Attendee...FM 3,4,5,6,8
                  http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
                  http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

                  Comment


                  • Better than my car- I'm launching at pushing and the only shifting I do is to re-arrange my hands on the back window.
                    1990 White L-Plus 5-speed rust-machine
                    Scrapped

                    1991 Blue L 5-speed
                    daily driver, intermittent project

                    1993 rustless wonder
                    A shell, awaiting suspension, brakes, and B6T

                    Comment


                    • ok so, welded the rear motor mount, and a qiuck and dirty test inside my shop shows both tires spinning evenly


                      and i finaly got around to taking those pics of the new ride hight and gave it a wash for the first time in over a year, allmost 2 lol....








                      i also polished the fuel rail and the top of the rad... it looks way better in real life, my camera sucks...








                      so, friday i should be going back out to the track, and with the new motor mount and slicks, i should be getting a bit quicker of a time

                      stay tuned, more to come...


                      Mike, AKA the sasquatch
                      1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                      Comment


                      • Good luck :thumbright:

                        1988 323 Station Wagon - KLG4 swapped
                        1988 323 GT - B6T Powered
                        2008 Ford Escape - Rollover Survivor

                        1990 Festiva - First Ever Completed KLZE swap (SOLD)

                        If no one from the future stops you from doing it, how bad of a decision can it really be?

                        Comment


                        • I'm really disappointed that you won't be coming to Westiva with this!

                          Sent from my SGH-I727R using Tapatalk 2
                          Ian
                          Calgary AB, Canada
                          93 L B6T: June 2016 FOTM
                          59 Austin Healey "Bugeye" Sprite

                          "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

                          Link to the "Road Trip Starting Points" page of my Econobox Café blog

                          Comment


                          • Looks awesome :thumbright:
                            -93' L BP swap/e-series, coilovers, RIO front swap, redrilled festy drums, Miata 14" 7 spokes.
                            -88' Mazda 323 SE, work in progress..
                            -85' Nissan Sentra 5 spd.

                            Comment


                            • ^^^ thanks guys

                              Originally posted by fastivaca View Post
                              I'm really disappointed that you won't be coming to Westiva with this!

                              Sent from my SGH-I727R using Tapatalk 2
                              ya im kind of bummed out ill be missing it this year, but there is allways next year... im hoping next year ill be able to trailer it out and do some racing at the track too...


                              Mike, AKA the sasquatch
                              1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                              Comment


                              • Car is looking great man! You owe me a ride... let's go do photos some time!
                                1979 Civic - Work in Progress http://myhondafestish.tumblr.com/

                                Comment

                                Working...
                                X