I call this... Progect Pheonix. :D

[Dragonhealer]

Too F****** Sweet!

[gergorian]

Too F****** Sweet!

Thanks! That's what I thought when I finally got them all together.

[TominMO]

When I'd gotta a ticket from a trooper for loud exhaust, I literally put a sock over the tip of my home made straight through muffler. Then I placed a wire mesh screen door like material over that. It killed my acceleration, or maybe it felt like it did because I couldn't hear the exhaust any more. But cruising down the road my vacuum readings were totally normal. But the old sock trick was overkill.

I once had a glasspack blow out and get really loud. I took a tin can, drilled some holes in the end, made some vertical cuts down the open end of the can to get it to scrunch down, and attached it to the muffler tip with a hose clamp. Worked fine as a temporary muffler.

[NateHertz]

Awesome build so far man just found this thread and really impressed keep up the hard work ... Also do you have a parts list for your coils?

[gergorian]

Awesome build so far man just found this thread and really impressed keep up the hard work ... Also do you have a parts list for your coils?

Sure! You can get all of the info as well from the stickied thread called "advanced suspension mods"

I just installed everything today and other than the fact I need to replace my inner and outer tie-rods then an alignment I am loving it so far.



This is exactly everything I bought.

1X http://www.ebay.com/itm/281469474025...%3AMEBIDX%3AIT

2X http://www.ebay.com/itm/290014121549...%3AMEBIDX%3AIT

2X http://www.ebay.com/itm/KYB-341007-S...735309&vxp=mtr

2x http://www.ebay.com/itm/Bilstein-193...item1e9dfffc54

2x http://www.ebay.com/itm/NEW-MIDGET-R...item43a0bbb547

All of that comes to roughly $582 (+ or - due to possible price fluctuations and the fact I had a few bolts break on me so I replaced those as well.)

[NateHertz]

Thanks brother appreciated On my way! Check out the thread tommarrow but if you don't mind me asking is there a lot of modification you gotta do to your car or the struts themselves ... If it's to much to ask like I said I'll be looking into it deeper tommarrow just have a late night itch to order something that can be easily installed... Lol thanks again

[gergorian]

No problem man.

The only modification you need to do is to modify the upper mounting hole on the front struts. I also forgot to mention that for the rears I have upper spring perches made by Charlie ( Advancedynamix ) but he doesn't have any more and he isn't going to be making anymore as far as I know. BUT, on the last 3-4 pages of the "Advanced suspension mods" post, they are talking about using washers to replicate the upper perch for cheap.

[NateHertz]

Thanks I'll look into them if there just turned down pieces I'll see if I can use the shop down the streets lathe