Festicle and xaero

[Hot_Wheels]

http://949racing.com/SuperMiata-Harmonic-Balancer.aspx

$322 you have to pre order them, I think there only making them in like batchs of 10, alot cheaper then the ATI option

[Flyin4stroke]

Festicle and xaero

How much did you give for that crank pulley? Where do you get one?

[Hot_Wheels]

small updates, manifold is coming along. The turbo will be forward facing angles towards the head light, it will have a direct opening for cold air via the grill. A bracket/mount will be made to have the turbo bolted to the top of the transmission for support.

[Hot_Wheels]

thanks! let me know when you need parts. Im waiting to hear some more progress from the fabricator. I was hoping to have this on the dyno by December.

[crazypunkerguy]

Lookin good Rick, I will have to make sure and check it out next time I visit good old IL! I am soaking some of this in when it comes time to build my 323's B6t!

[Hot_Wheels]

got my new Supermiata damper today. I may need to make some clearance modifications but i think it will be worth the insurance of not blowing up my motor and i can rev it a little more if needed.

[festyfreak39]

This thing is getting serious !

[Hot_Wheels]

Small update, got more parts! I sent the turbo out for inspection and minor rebuid. I was not sure what the turbo was due to the tag was missing, I was also concerned due to the exhaust turbine looked like it was coated in some ceramic paint? So i drove to a local shop R&S in Minooka, They ended up replacing the cold side compressor wheel due to it had 2 bent fins (not sure how that happend) and they cleaned the exhaust side balanced it and replaced some clips. Its good as new and they where able to verify its a ball bearing gt2560r and re certified it! I also got my 1000cc deatsch works 1000 cc low imp injectors, fuel filter and tial knock of blow off valve. Last time i spoke with the fabricator he was working on making the turbo manifold so i think that should be done soon.





unbent portion of wheel for comparison

bent fins

[Hot_Wheels]

small update, bolted the head down, the rear trans mount was fabricated. Where at a standstill til we can get the turbo manifold made so we can get a idea where everything is going to be routed. got tons of parts will take some pictures tomorrow. here is a sneak peak though.

[Hot_Wheels]

received the head yesterday from BogusSvo, will post more pics in a different thread.

[garagedoorguy]

i don't have a copy i had to share it from the person that took the video he is going to try to e-mail it

[Hot_Wheels]

really??? email me the videos and ill host them on photo bucket, i dont have fb

[garagedoorguy]

i just posted some video on https://www.facebook.com/groups/479983362013723/

[Hot_Wheels]

Festicle is very close to being back on the road, It runs and drive but Dan needs to fix the coolany over flow. Maybe he will chime in with some updated pictures.

[Hot_Wheels]

small update, Engine is in up top but still need to do the cross member underneath.



Im excited i met a Miata guy that has been running a AEM Universal EMS4 on his miata for some time, He is offering to do the wiring. He has a super clean lay out on his car and has some really good ideas! I cant wait to see how the harness will turn out.