My n/a super b3 build

[drumnerd33]

Re: My n/a super b3 build

Yeah it's mostly a safety feature, I think it's a good idea. The engine is in!!!


Sent from my LG-LS970 using Tapatalk 2

[DriverOne]

Re: My n/a super b3 build

That is a b&m short shifter for Honduhhhh civic... I Saw some threads on here about the cheap ebay civic shifters, I figured I would try the b&m

Hmm... It still makes me wonder if I can't go rob a 323.

[Chobobulous]

The pressure switch turns the light on at a very low pressure like 3 or 4 pounds... When you crank your engine over you'll notice the light goes out.

Sent from my LG-LS970 using Tapatalk 2

When i crank my engine all the lights turn out

[nitrofarm]

When the engine starts there is minimal oil pressure correct? Wouldn't this me somewhat hindering in starting the car?

A lot of Generic Motors are wired this way. Its a pretty good system.

The pressure switch turns the light on at a very low pressure like 3 or 4 pounds... When you crank your engine over you'll notice the light goes out.

Sent from my LG-LS970 using Tapatalk 2

I think I just read in the manual that our switchs are 6psi. I'm really impressed with how quickly you got her put together. Great work Drummer ! I was surprised when you said you might go Turbo in the future though? Would you make the switch to Fuel Injected then?

[drumnerd33]

I just got the shifter hooked up to the tranny... love it, its got a nice short throw and sits pretty low in the cab.

[drumnerd33]

Nope would be building a blow through system on my weber, weber is pretty well set up for blow through. But im still undecided, matt says ill prob be extremely happy with this setup n/a, plus would need a different cam for turbo so i will see once i get this broke in and can really get into it to see how well it does then go from there.

[drumnerd33]

A lot of Generic Motors are wired this way. Its a pretty good system.


I think I just read in the manual that our switchs are 6psi. I'm really impressed with how quickly you got her put together. Great work Drummer ! I was surprised when you said you might go Turbo in the future though? Would you make the switch to Fuel Injected then?

Oh ok 6psi i knew it was really low.

[Flw Sock]

Video of it running? Drive around video?

[drumnerd33]

Will do, but literally just dropped it in and got the shifter hooked up still have to hook everything up, fill it with fluids, do my brakes before i put the axles back in, then start it. Will do a first start up video and can do a driving video but cant really get into the throttle till after 500 miles. Once its broke in then will have some fun and post some videosnthego:

[nitrofarm]

Nope would be building a blow through system on my weber, weber is pretty well set up for blow through. But im still undecided, matt says ill prob be extremely happy with this setup n/a, plus would need a different cam for turbo so i will see once i get this broke in and can really get into it to see how well it does then go from there.

Ok Just curious what you intended to do. Looks great Dude,and you do great work!

[drumnerd33]

Thank you.

[Damkid]

My n/a super b3 build

Does it run yet?

[drumnerd33]

Not yet just dropped it in.

[Damkid]

My n/a super b3 build

:lol: I know I'm just bugging ya

[Prafeston]

Looking awesome!!