Potta's hillclimb challenger

[Gomez]

Mmmmmmmmmmmm bushing kits. Goooooood!!!!

[Potta]

I'm hoping to be able to supply a complete bush kit very soon. The super pro gear is great I use all their stuff in my customers cars too. I'm beginning to get the itch to make custom (adjustable) arms for car too. Still can't believe how much I've fallen for this little weapon too haha.

[Advancedynamix]

I have superpro inner control arm bushings in my car. They work nicely.



The sway bar end bushings are moog.

[Potta]

How do you get all those goodies so cheap potta? Hook me up!!! :p

I know a lot of people in low places hahaha. Not really just knowing so many people in the car scene here means used cheap parts are usually very plentiful.
Noticed a slight pull to the right under acceleration so I guessed that my lca bushes needed replacing and they did. For a grand total of $19 I went and picked up some nolathane bushes. I'm sponsored by super pro for the other car but was unable to get my hands on anything for the 121 at the moment. So we may have to develop a full bush kit front to back for the festiva and 121 in the very near future.
So much red under the car now 😔





Although handling has been greatly improved now.

[moz]

How do you get all those goodies so cheap potta? Hook me up!!! :p

[Potta]

Also scored this today for $10 so ill whack it on ASAP.



Only issue now is converting the car to a efi setup to suit the tx3. Hopefully I can use most of the tx3 parts for the conversion.

[Potta]

If it is a familia and not a 323, you might be lucky enough to have a JDM motor.
Apart from more power and some slight differences, they had a much better intake manifold.

My brother is buying a 121/festiva after taking mine for a squirt on the weekend.
We found a guy selling two tx3 turbo fords complete for $1500 so we are going to get those on a couple of weeks hopefully.

[moz]

If it is a familia and not a 323, you might be lucky enough to have a JDM motor.
Apart from more power and some slight differences, they had a much better intake manifold.

[Potta]

Bf Mazda 323 gtx for sale in picton!!! Asking $1200


http://www.gumtree.com.au/s-ad/picto...ine/1022148607

Gonna call in the morning and see if I can go have a look at it.

[moz]

Bf Mazda 323 gtx for sale in picton!!! Asking $1200

http://www.gumtree.com.au/s-ad/picton/wrecking/bj-gtx-mazda-familia-fwd-1-6ltr-dohc-turbo-b6t-engine/1022148607

[Potta]

Thanks for the comments guys.
So I had a couple of hours spare on a Saturday afternoon (today) so I decided to get my service on seeing as I will most likely get everything else done to the car before I go for a b6t swap (or build a screamer n/a b6).
Ok so today the car copped a full service of the gearbox engine , greased everything , did a valve set , radiator flush (oh man was it brown when I started) , retensioned engine mounts which were surprisingly loose. I also fixed the first problem I found with the car , the 12v accessory plug wouldn't work but after some playing with the multimeter I found it to just be corrosion on the inner terminal of the plug . so I stripped the whole plug and gave the thing a scrub with a bit if emery paper. Also fitted new plugs and had to slighty adjust the timing. Man she ehns sweet now everything is working and I have 100% confidence in my little car now.

[moz]

Well when I get home from a 14hr day at work I relax by fixing some more stuff. I'd rather be in my shed until 11 then watch the usual crap that's on tv lol. I'm also finished all the other projects I've been doing for other people so I've gotta do something.

I do a lot of performance work for fellow racers cars also. Fitting and tuning suspension components , fabrication work , engine builds etc etc ..... My little side project is called "CONNOR MOTORSPORTS ". Basically between myself and a few buddies we race and build everything from endurance go karting , Mx , road bikes , cars and the list goes on. If it can be pulled apart and made better (faster) it will be.

GULP!..... 14 Hour shifts??
I'd burn out after a month.

[sketchman]

Wow, that looks good.

[Potta]

Had some more help from my little buddy to finish up cleaning the car this afternoon . We took off the flaking shades stickers on the window what a crappy job that is. We also gave the car it's first level of polish too. With 2 more to go until its down too the super fine polish then ill wax and seal the paint.



The superstar (just turned 3) has already begun his racing aspirations haha.



I'm beginning to think ill paint the grey bumpers and the side strips gloss black also.

[Potta]

Man!! Where do you find the time?
You're moving along real fast.

Looks great though!!!

Well when I get home from a 14hr day at work I relax by fixing some more stuff. I'd rather be in my shed until 11 then watch the usual crap that's on tv lol. I'm also finished all the other projects I've been doing for other people so I've gotta do something.

I do a lot of performance work for fellow racers cars also. Fitting and tuning suspension components , fabrication work , engine builds etc etc ..... My little side project is called "CONNOR MOTORSPORTS ". Basically between myself and a few buddies we race and build everything from endurance go karting , Mx , road bikes , cars and the list goes on. If it can be pulled apart and made better (faster) it will be.