Announcement

Collapse
No announcement yet.

[FEELER] cluster inserts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [FEELER] cluster inserts

    Tell me if you like them here are just four I made I got a couple others but I ran out of ink so they looked bad, if they are well liked I may just have to sell em







    91 L - modified to SLX- "Tin Can Project"
    http://www.cardomain.com/ride/2850897
    92 GL - parts car
    97 aspire - parts car
    87 323 DX - daily driver

    Visit My Store - New Products available!
    http://www.cafepress.com/tunner

    Car enthusiasts will respect all makes and models that preform.
    Brand enthusiasts are the root of all problems in the car community.

  • #2
    i like the top one... you could send me one.. and i will install it and show everyone what they look like installed.. haha or if you do want to sell them let me know how much

    Comment


    • #3
      What kind of ink are you using. Is it standard injet?

      I'd like to buy one if it's dye-sublimation or laser.

      Comment


      • #4
        Personally, I love your designs.

        Comment


        • #5
          You need to make some for tach dashes.
          Brian
          http://www.cardomain.com/ride/2274977



          93 GL modyfied!!!
          :fish:

          Comment


          • #6
            I like the third one.
            Festiva: Because even my dog can build a Honda.
            ---------------------------------------------------------------------------

            '90 L. B8ME/Kia Rio 5 speed. Rio/Aspire suspension swap. :-D
            '81 Mustang. Inline 6, Automatic.
            '95 Eagle Summit Wagon. 4G64 Powered.

            Comment


            • #7
              Originally posted by 25Horseplay View Post
              You need to make some for tach dashes.
              and the 110MPH/180KPH tach clusters

              1988 323 Station Wagon - KLG4 swapped
              1988 323 GT - B6T Powered
              2008 Ford Escape - Rollover Survivor

              1990 Festiva - First Ever Completed KLZE swap (SOLD)

              If no one from the future stops you from doing it, how bad of a decision can it really be?

              Comment


              • #8
                and they go in how?
                http://www.cardomain.com/ride/2065064/1
                Paulbarrera12.com
                Festiva Visualizer Project

                Comment


                • #9
                  i like the top 1 that says festiva on it

                  Comment


                  • #10
                    I agree with Brian. You should make some for tach clusters. Many here are trying to switch over to the tach cluster if they don't have one currently, so you could sell quite a few of those. Nice work on the inserts by the way! Very professional looking. I like the top one as well, but would add in the fuel and temperature emblems on their respective sides
                    90 Festiva with Brand new B3, 5spd
                    92 B6 Festiva, 5spd
                    94 Mustang DSS 331, Vortec S-Trim, 5 spd
                    94 Mustang GT, stock, automatic

                    Comment


                    • #11
                      Originally posted by wrestler3025 View Post
                      I agree with Brian. You should make some for tach clusters. Many here are trying to switch over to the tach cluster if they don't have one currently, so you could sell quite a few of those. Nice work on the inserts by the way! Very professional looking. I like the top one as well, but would add in the fuel and temperature emblems on their respective sides
                      I dont have a tach cluster to make a template off of. I take the cluster apart and do a series of measurements off the faceplates to make a template in an animation program I have. Then once the template is made I can put any design behind it, and can change the fonts for the lettering and numbering.

                      so if someone has some spare faceplates for a tach cluster I would be willing to make one for free for the use of the plates


                      Originally posted by xanthinic12 View Post
                      and they go in how?
                      you install them right over the top of the faceplates with the screws that hold your guages inplace - the signals, odometer, and idiot lights all get cut out

                      Originally posted by gotrootdude View Post
                      What kind of ink are you using. Is it standard injet?

                      I'd like to buy one if it's dye-sublimation or laser.


                      as for the ink I use the photo ink for a HP 3100
                      Last edited by Festiva_tunner; 07-30-2008, 01:14 PM.

                      91 L - modified to SLX- "Tin Can Project"
                      http://www.cardomain.com/ride/2850897
                      92 GL - parts car
                      97 aspire - parts car
                      87 323 DX - daily driver

                      Visit My Store - New Products available!
                      http://www.cafepress.com/tunner

                      Car enthusiasts will respect all makes and models that preform.
                      Brand enthusiasts are the root of all problems in the car community.

                      Comment


                      • #12
                        i was thinking of doing somthing like this. i have this big roll of stick on stainless steel looking stuff, i thought it would look cool with a metal looking cluster. i also started on the heater controls with the same stuff, but then i got frustrated and gave up... im still looking for a company to cut them out for me, if they turn out nice ill post some pics.


                        Mike, AKA the sasquatch
                        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                        Comment


                        • #13
                          are you putting them on a transparent backing so the light from the speedo can be seen in the proper places?
                          "FLTG4LIFE" @FINALLEVEL , "PBH"
                          89L Silver EFI auto
                          91GL Green Auto DD
                          There ain't no rest for the wicked
                          until we close our eyes for good.
                          I will sleep when I die!
                          I'm a little hunk of tin, nobody knows what shape I'm in. I've got four wheels and a running board, I'm not a Chevy, I'M A FORD!

                          Comment


                          • #14
                            I'd like one, but with a black and orange festiva logo on the side and in the center place a stormtrooper helmet from star wars, and Bold orange numbers for a tach. I might be able to send you my tach for a template,pm me. how much would you charge?
                            89' Maroon and black Festiva LX with a sunroof. :alien:

                            Comment


                            • #15
                              I had a spare tach cluster face, if I still have it I'll send i your way!
                              Brian
                              http://www.cardomain.com/ride/2274977



                              93 GL modyfied!!!
                              :fish:

                              Comment

                              Working...
                              X