[FEELER] cluster inserts

[Festiva_tunner]

Tell me if you like them here are just four I made I got a couple others but I ran out of ink so they looked bad, if they are well liked I may just have to sell em

[imateo44]

i like the top one... you could send me one.. and i will install it and show everyone what they look like installed.. haha or if you do want to sell them let me know how much

[gotrootdude]

What kind of ink are you using. Is it standard injet?

I'd like to buy one if it's dye-sublimation or laser.

[gotrootdude]

Personally, I love your designs.

[25Horseplay]

You need to make some for tach dashes.

[JPT]

I like the third one.

[Damkid]

You need to make some for tach dashes.

and the 110MPH/180KPH tach clusters

[xanthinic12]

and they go in how?

[benms79]

i like the top 1 that says festiva on it

[wrestler3025]

I agree with Brian. You should make some for tach clusters. Many here are trying to switch over to the tach cluster if they don't have one currently, so you could sell quite a few of those. Nice work on the inserts by the way! Very professional looking. I like the top one as well, but would add in the fuel and temperature emblems on their respective sides

[Festiva_tunner]

I agree with Brian. You should make some for tach clusters. Many here are trying to switch over to the tach cluster if they don't have one currently, so you could sell quite a few of those. Nice work on the inserts by the way! Very professional looking. I like the top one as well, but would add in the fuel and temperature emblems on their respective sides

I dont have a tach cluster to make a template off of. I take the cluster apart and do a series of measurements off the faceplates to make a template in an animation program I have. Then once the template is made I can put any design behind it, and can change the fonts for the lettering and numbering.

so if someone has some spare faceplates for a tach cluster I would be willing to make one for free for the use of the plates

and they go in how?

you install them right over the top of the faceplates with the screws that hold your guages inplace - the signals, odometer, and idiot lights all get cut out

What kind of ink are you using. Is it standard injet?

I'd like to buy one if it's dye-sublimation or laser.

as for the ink I use the photo ink for a HP 3100

[sasquatch]

i was thinking of doing somthing like this. i have this big roll of stick on stainless steel looking stuff, i thought it would look cool with a metal looking cluster. i also started on the heater controls with the same stuff, but then i got frustrated and gave up... im still looking for a company to cut them out for me, if they turn out nice ill post some pics.

[GenevaDirt]

are you putting them on a transparent backing so the light from the speedo can be seen in the proper places?

[Ogrestiva]

I'd like one, but with a black and orange festiva logo on the side and in the center place a stormtrooper helmet from star wars, and Bold orange numbers for a tach. I might be able to send you my tach for a template,pm me. how much would you charge?

[25Horseplay]

I had a spare tach cluster face, if I still have it I'll send i your way!