-
It's a good thing you don't read the stickies, you might of learned something.
Poverty produces creativity -
Nope they were not sold in japan only Ford Festiva's interestingly enough.Originally posted by hotfordcat View Post
OH i would like GTA or GTX parts/front clip/anything
It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativityComment
-
I am in for Festiva GT-X front & rear bumpers please.
Maybe combined shipping for several orders in one container shipped to the USA and a responsible person to distribute the parts sounds like a good recipe for success IMO.I'm going to come at you like a spider monkey!
White 1993 L plus, 5 speed - 47k miles
* Aspire brake swap, 14" Miata wheels & Tein coliover suspensionComment
-
ya thats a good idea.Originally posted by b8kedbeans View Post
also even if its the g36mr i think its worth trying... after all its a "G" series trans so the bell housing may swap over to a "B" series motor... you never know... maby the only one that will fit is a v6... v6, 6 speed festiva...... drool
oooo and x2 on the gtx bumpers!!!
maby even the gauge pod in the center console you could get for the gtx.
and the adjusting suspension with push botton controll.
and gtx hood.
and gtx/gta seats.
and i could list alot of stuff but i dont think people want to read it all... lol.
check out these links from the fms web site.
Last edited by sasquatch; 04-27-2009, 08:43 PM.
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
just a thought on shipping; It might be best to arrange for a shipping container. Fill the container with everyones' bits, and ship it to a receiver in Long Beach, CA. Complete containers can often be shipped for around $1000 from Austrailia, so I wouldn't think Japan would be too different?Jim DeAngelis
kittens give Morbo gas!!
Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
Performance Red 94 Aspire SE (Stimpson)Comment
-
If were putting a huge order, then I might be in for some parts, GTX/GTA...etc89' Maroon and black Festiva LX with a sunroof. :alien:Comment
-
i like that container idea! i'd be in for a sr20det engine/ecu/harness out of a nissan avenir or bluebird. as well as the sunny bumpers/skirts i pm'd about. you could do well with this service, there is always a demand for jdm parts.Comment
-
oooo BTW one note on that 6 speed.... DIBS!!!!!! hahaha!!!! its mine :twisted:
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
I went by the jy today , the 6-speed is sold, booo! anyway i will look for gtx parts this weekend! i can ship anything 70lbs and smaller really easy, anything bigger would take some time and moneyIf It's worth doin' It's worth Overdoin'Comment
-
WTF i called dibs lol... what is this 6 speed out of? maby i can find one some place else... do you have a camera that you can take lots of pics with? then we can see what there is at the yardOriginally posted by tbird302v8 View Post
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
Festiva GTX parts!!!!! As a matter of fact how about a whole Festiva GTX?Comment
-
Funtop!Going old school...
89L Carby FIDO, previously owned by FestivaFredComment
-
Any other Festiva bodykits that only are available in Japan? If so DO WANT!!!'93 BP-T 57trim TO4E - Coilovers - 13x7 steelies - 175/60 - 48k mi
Comment
-
Any BPD's out of a 1989-1994 Mazda Familia GT-X or 1992-1993 (BPD) Mazda Familia GT-R / GTAe? Or other big bp turbo'ed engines that you can't get here in the U.S.?89' Maroon and black Festiva LX with a sunroof. :alien:Comment
-
jdm b6t intake manifold
bf 323 gtx front bumper, headlights, clear corners and grill
mazda 121 badges
ill probly think of more laterBetter Than Nothing Racing
Way too many cars
:woc:Comment
Tweet
Comment