Brakequip Ez bend brake tube/lines

[xlence]

Most major auto parts chains carry this type of line now, commonly known as Poly-Armour. It's very maleable and the coating makes it very resistant to corrosion. I started using this on a master cylinder conversion I developed for the early Econoline PUs and vans. I had a very tight spot that needed a 90 degree bend right out of the MC but could not bend a standard line that tight. I can use this line, take a piece of 3/16" rod in my vice and bend it 90 degrees behind the fitting with my hands without collapsing it. I also need a metric 12 mm fitting and bubble flare at the MC with a inverted flare and 3/8 x 24 SAE fitting on the other end. These are available right off the shelf. Very nice product.

Dennis in Oregon

Nice!! Thanks for the review/comments!

[Festiva_tunner]

HAHA I can see you stopping in the middle of the road . . . . that would be a sight to see . . . cars honking legs sticking out in the lane lol
You women have the upper hand when it comes to flirting to get things though I tell you if a guy went in and flirted with the parts counter girl she would blow him off because every guy before him did the same thing