any one have any recommendations on spark plug wires, performance wires would be best, i was looking at festiva motor sports 8.5mm. has any one ever got the FMS ones?
Thanks
B6 with lightweight Flywheel, FMS street cam
Holy heck gee willickers its fast!!drool
factory motorcraft wires are very high quality, which of course is unfortunately reflected in the price.
ive never had wires that fit better than new motorcrafts for any of my engines.
I bought some cheap Duralast wires from Auto Zone, only ones in town in stock, and the coil wire was too short. I wish I could have found some Motorcraft in stock. I've used Magnecor in the past and was happy with them. Here's a great price on some 8.5mm
Rick
1993 Ford Festiva
1986 AMC Eagle Wagon 4.2L/4.0L head, AW4,NP242, Chrysler 8.25" rear. SOLD
1981 AMC Eagle Wagon-As Seen on TV Lost In Transmission
2000 Ford E350
pretty much any taylor wires are good/great! or u could buy a set of msd wires for a v8 (the cut to legenth style) and make 2 sets for less than 2 normal sets of wires. just gotta find a set with the correct boots.
88 festiva lx, 2.3 turbo rwd swap in progress
1999.5 f-350 4x4 7.3 gtp38r 5" exhaust ect.
R.i.p. 1990 Western Star 5964s 3406b 530whp (4.2mpg!)
00' western star flat top ex, 600hp 6nz 2250tq, 18918b, 3.55, full lockers, 6" straight pipes
03' gt, full termi swap 700+ whp build
sponsered by,
pam pam's junk, dayton OR.
Bob's ok tires, salem OR.
Clausen Truckin', keizer OR.
MSD super conductors. 8.5 mm and only 50 ohms per foot of resistance. thats what i use on my racecar and like festivazoom said, they are cuz to fit so make 2 sets of them!
if you want to get crazy you can buy all the parts you need from MSD and them make your own custom wires that fit PERFECT (if you do it right lol...) i had msd wires on my b3 and i noticed that it started up a bit better and reved a bit cleaner too, but i also had a higher powerd coil on it so with the stock coil i dont know if you would gain anything... but you may... but if yours are junk then it will make a diffrence
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...
Comment