You're right Gomez, I need an inline fuse on the battery + to number 30 on the relay wire, I just didn't have one on hand but will do so this weekend when I move my battery to the passengers side behind the headlight.
Announcement
Collapse
No announcement yet.
What have you done to your Festiva today!?
Collapse
This is a sticky topic.
X
X
-
Finally finished the aspire swap but I'm having an issue with the right brake caliper binding up. I replaced the caliper and it is still doing it, I suspect the caliper mounting ears on the knuckle may be bent. Also properly torqued all the wheel bearings and greased my poly torsion beam bushings.
---
- Sent from my iPhone using Tapatalk
Comment
-
Installed a pillar gauge pod. Still haven't fixed my tach so it remains. This isn't finished product this was in test fitting stage. But you get the point.1988 Ford Festiva "Sonic" BPT g25mr MS2 standalone ecu, FOTY '11, Best Beater FMV, Fan Favorite FMVI
1989 Ford Mustang GT 5.slow
1996 Ford F-150
Comment
-
I really aught to take a video of my paper route and all my trooper festy endures day in and day out.
Anyone interested?
Comment
-
Pulled my turbo off to check if oil is coming out of my exhaust ports.Current cars:
1993 Ford Festiva 5-Speed - Festiclese III - Cousin of the Banhammer - "The Jalopnik Car"
1984 Toyota Cressida - 2JZGE Swap, Turbocharged.
2013 Mazda Mazda2 - Exhaust and Wheels (the daily)
2002 Toyota Tundra - V6/Auto/2WD - The Tow Vehicle.
Comment
-
.... Why don't you do that, I for one, I think, would appreciate seeing it!!
.
Originally posted by 200KGPGTP View PostI really aught to take a video of my paper route and all my trooper festy endures day in and day out.
Anyone interested?A hunch is creativity trying to tell you something.
Comment
-
added a new Festiva to the fleet. my wife said if I found an auto she would drive it. so be it, there is now a green 93GL auto car here now. the old suburban will soon be retired due to gas consumption and near $4 per gallon to fill up.91 Festiva GL "Scrat"
82 Honda Goldwing GL1100i
85 BMW 535is "Brunhild"
Comment
-
Put on lower control arms and tie-pod ends. Noticed they were bad when changing the rotors 2 weeks ago, but money only goes so far, so I had to wait til I got more of it. lol
So, in the past 2 weeks......
-new front wheel bearings(Timken)
-new rotors
-new calipers
-new brake pads
-new lower control arms
-new tie-rods
-new cv boots and re-packed cv joints
-DIY alignment, runs straight and true
now...its time to look at the rear brakes/suspensionLast edited by drddan; 08-07-2011, 12:58 PM.Dan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647
Comment
-
Comment
-
Tinted the drivers side rear window. 2 down & the hatch to go Saved the hardest for the last since I never applied tint b4. Side windows turned out nice but a little worried on the hatch from horror stories of creases. Anyone got any tips?Last edited by SuperDaveGulvak; 08-07-2011, 03:43 PM.
Comment
-
Originally posted by 200KGPGTP View PostDid you do the front bearing/rotor yourself?
I quizzed some shops about the bearings first, and the guy that knew about the Festy bearings and shims got the job! An old time drag car builder.
Cost $70Dan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647
Comment
-
There use a special tool for pressing the hubs apart. I made my own based on the ford tool. Hopefully the shop you took it to has something like that.
I raced my festy at the Autox today. It was a blast, even with crappy tires I was able to come within 1 sec of my buddy who drives a suby on race rubber. I need to find some springs to get it a little lower without losing contact on full extension. The car sits too high with 13"s
---
- Sent from my iPhone using Tapatalk
Comment
-
Previous owner of ZEFstiva
Comment
Comment