Please Help :) Newbie Owner

[CrookedHalos]

323 are rare in my area. I can't find any locally. :/
Today driving home my turn signals went out!! My hazard work but I can't signal turns. I can't locate the relay :/

[Movin]

Probably the hazard switch, wiggle it, run some PB blaster down through it
to wash out the gunk..

The relay or flasher is behind the upper part of the kick panel, drivers side.

[Chobobulous]

Hey! im from Las Cruces, I am in El Paso all the time. I was at the mega u pull on Montana earlier today. We should meet up someday!!!

[CrookedHalos]

Haha that's awesome! I'm hitting up Mega U Pull with a friend early morning tomorrow.
As for my turn signals, I smacked the hazard switch with the handle end of my screwdriver. Turned then on :3 wooo lol Thanks for the help!

[Chobobulous]

The website says there are 3 in there, there are really 4 though. Are you from bliss?

[CrookedHalos]

No Im just a civilian lol. Lived here most my life but I grew up in Dallas.

[Chobobulous]

Thats neat. Ive seen a couple festivas there in El Paso, mostly off I 10. If you dont have access to a lot of tools, HMU when you need to do big work. Ill take you on base to the auto repair center. Its around 5 dollars an hour for a lift and you have access to whatever tools that you need. Its really an amazing deal.

[Bert]

If you dont have access to a lot of tools, HMU when you need to do big work. Ill take you on base to the auto repair center. Its around 5 dollars an hour for a lift and you have access to whatever tools that you need. Its really an amazing deal.

No kidding!

[Chobobulous]

No kidding!

Yea man its where i do all my work. I see dudes in there doing all kinds of crazy stuff from rebuilding engines to changing oil. They have welders, they can machine brakes pretty much anything. For some of the specialty tools you have to pay a little extra ie, those welders and lathes, but it is well worth it imo.