Announcement

Collapse
No announcement yet.

Everyone meet Lean my latest addition to my fleet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by TheNewAmericanSpirit View Post
    Zanzer did a really nice job on your head!
    Hopefully it will be at the upcoming festiva dyno day to see what the hp gains are. You should ride out next week to the dyno day if you don't have anything going on,
    Barbie Car - '90 L-plus_2nd Gen SOHC B6+rear turbo @ 8 psi
    Festycul - '9? 5spd_full roll cage, completely gutted, hydro g-series, B6T @ 15psi, rocketchip ecu,Willwood master cylinder, Mit. Galant VR-4 rotors, Hawk racing pads, capri knuckles, 323 LCA's, BrideLow Max seats, 5pt. harness, lexan windows, fuel cell, aluminum radiator, 323 coilovers
    Elvis - '93 L 5spd_B3+T build in progress
    WhiteGirl - '93 GL Immaculate shape, deciding what to build with it?

    Comment


    • #32
      Originally posted by Zcallicutt7 View Post
      Should I get Festiva or Kia Rio struts for the front?
      I do not have any experience with the rio struts but I have heard it is a nice upgrade, I just bought a complete set of festiva kyb's for Kumalaba's car
      Barbie Car - '90 L-plus_2nd Gen SOHC B6+rear turbo @ 8 psi
      Festycul - '9? 5spd_full roll cage, completely gutted, hydro g-series, B6T @ 15psi, rocketchip ecu,Willwood master cylinder, Mit. Galant VR-4 rotors, Hawk racing pads, capri knuckles, 323 LCA's, BrideLow Max seats, 5pt. harness, lexan windows, fuel cell, aluminum radiator, 323 coilovers
      Elvis - '93 L 5spd_B3+T build in progress
      WhiteGirl - '93 GL Immaculate shape, deciding what to build with it?

      Comment


      • #33
        Originally posted by kayweb View Post
        I need to get ahold of some of that Dawn stuff!
        Will those racelands bolt up directly or do they need fab work to fit?
        Dawn Power dissolver FTW! Racelands need to be slighty moded to fit, all you have to do is elongate the top hole so the knuckles will bolt up. I will get a pic as soon as I can to show you
        Barbie Car - '90 L-plus_2nd Gen SOHC B6+rear turbo @ 8 psi
        Festycul - '9? 5spd_full roll cage, completely gutted, hydro g-series, B6T @ 15psi, rocketchip ecu,Willwood master cylinder, Mit. Galant VR-4 rotors, Hawk racing pads, capri knuckles, 323 LCA's, BrideLow Max seats, 5pt. harness, lexan windows, fuel cell, aluminum radiator, 323 coilovers
        Elvis - '93 L 5spd_B3+T build in progress
        WhiteGirl - '93 GL Immaculate shape, deciding what to build with it?

        Comment


        • #34
          Yeah I'll probably go with the Festiva KYB's to save a little $$. This is my DD fuel saver. Not getting crazy with this one until I get another DD...

          Comment


          • #35
            That's good to hear, what car were they originally intended for? Cheap and not too bouncy, i'm a fan.
            1994 Honda Accord LX, 5spd

            1992 Festy GL, 5spd (she be broken :/)

            Comment


            • #36
              Originally posted by kayweb View Post
              That's good to hear, what car were they originally intended for? Cheap and not too bouncy, i'm a fan.
              vw mk1
              Barbie Car - '90 L-plus_2nd Gen SOHC B6+rear turbo @ 8 psi
              Festycul - '9? 5spd_full roll cage, completely gutted, hydro g-series, B6T @ 15psi, rocketchip ecu,Willwood master cylinder, Mit. Galant VR-4 rotors, Hawk racing pads, capri knuckles, 323 LCA's, BrideLow Max seats, 5pt. harness, lexan windows, fuel cell, aluminum radiator, 323 coilovers
              Elvis - '93 L 5spd_B3+T build in progress
              WhiteGirl - '93 GL Immaculate shape, deciding what to build with it?

              Comment


              • #37
                Originally posted by Festevil3 View Post
                Now for some pics of the head, Zanzer did a really nice job
                That was a "quick and dirty" port job and I really need to get some new bits. Just you wait until I actually take my time with some new tooling :mrgreen:
                If a hammer doesn't fix it you have an electrical problem




                WWZD
                Zulu Ministries

                Comment


                • #38
                  I finally got around to installing the interior










                  Last edited by Festevil3; 08-27-2013, 06:08 AM.
                  Barbie Car - '90 L-plus_2nd Gen SOHC B6+rear turbo @ 8 psi
                  Festycul - '9? 5spd_full roll cage, completely gutted, hydro g-series, B6T @ 15psi, rocketchip ecu,Willwood master cylinder, Mit. Galant VR-4 rotors, Hawk racing pads, capri knuckles, 323 LCA's, BrideLow Max seats, 5pt. harness, lexan windows, fuel cell, aluminum radiator, 323 coilovers
                  Elvis - '93 L 5spd_B3+T build in progress
                  WhiteGirl - '93 GL Immaculate shape, deciding what to build with it?

                  Comment


                  • #39
                    so kool!
                    Never Hire a Boy to do a Man's Job!!

                    Comment


                    • #40
                      That interior is SWEET. And +1 for thinking outside the box.
                      Any difference that makes no difference is no difference.

                      Old Blue- New Tricks
                      91 Festiva FSM PDF - Dropbox

                      Comment


                      • #41
                        I have seen the interior in person . . . and it looks even better in person! You can see where Kevin took his time to match up the pictures. Time and patience gets you great results
                        88L - Awaiting bigger and better things
                        92L - Dead and needs love - was DD
                        91 - Shell with title
                        92GL - receiving B8 Swap and will be DD

                        Comment


                        • #42
                          ^^ X2 Got to see it last night and he did a great job!

                          And Lean isn't running lean anymore! Woo hoo! LOL banana time nthego:
                          Last edited by Zanzer; 08-27-2013, 10:29 AM.
                          If a hammer doesn't fix it you have an electrical problem




                          WWZD
                          Zulu Ministries

                          Comment


                          • #43
                            ^:thumbs_up:
                            Never Hire a Boy to do a Man's Job!!

                            Comment

                            Working...
                            X