Minor understeer correction ideas

[Dragonhealer]

Guess my explanation isn't any good

Moving the mounts at the front forward will get much more effect, but introduces another variable not for the novice, I'll shut up now.

[ryanprins13]

Guess my explanation isn't any good

.

You mean replacing the metal cup thats further foreward with a washer to take less space? Shaving down that rubber bushing a bit? Then adding a washer at the rear end to push it foreward?

Sent from my SM-G920W8 using Tapatalk

[Rick the Quick]

This is good reading!

[FestYboy]

You mean replacing the metal cup thats further foreward with a washer to take less space? Shaving down that rubber bushing a bit? Then adding a washer at the rear end to push it foreward?

Sent from my SM-G920W8 using Tapatalk

That would do it, then the issue Dragonhealer speaks of doesn't come into play. The down side to that method though is limited range of adjustment.

Still, the best way to get what we're all after is remove the swaybar all together.

[mikemounlio]

Look into the tow plates that are for sell in here. I have a set and they are wonderful. ALso look at my suspension thread. If you redo your suspension to the advanced setup you will be way better off. -2 to -3° up front and as much as you can run in the rear up to like -5°.

I would start with the suspension tho. It makes the car (festiva) a entirely new car. Once your suspension is proper and set up you can go from there. FYI the suspension is around 500$