So i had this idea. Ive been looking into making an oddball ratrod lately, with the idea of using a ranger or s10, chopping the top, and exposing the engine like the older rods, but had a new idea. What if i took the body of a festiva and placed it on a small truck frame, and stuffed a V8, ford 289 most likely, at the front, and chopped the roof of the festiva? How hard is it to take the tub of a festiva and mount it to a frame?
Announcement
Collapse
No announcement yet.
Ratrod (Ratstiva?)
Collapse
X
-
In my opinion it would take a lot of creativity not to mention the width/track of any so called mini truck is considerably larger then the Festiva's. Of course that's what fender flares are for. I always thought a Festiva body would make for a nice sleeper if you could fit the body over a more up to date / improved chassis/ running gear. Widening the body could be done if you had a donor car. Cut car #1 in half, take a center section (width of your choice) out of car #2 and weld it back together. It is entirely possible. The biggest hurdle is the glass. I recently put a windshield in my '91 and was surprised to find they are getting scarce. Imagine needing one 5 inches wider? As for cutting the body off of the pan. Go ahead and try it. That's the only way you will know for sure. I hope your fabricating skills are high and you can accept the fact that it will take a lot time to accomplish.'88 Festiva LX 5 speed, A/C, Carb, restored $$$ body paint, badly wrecked @ 200k.
'93 Festiva L, 5 speed, Aqua, bought from the original owner,.Zero rust but very nasty otherwise. Awaits the B6T.
'91 Festiva L, 5 speed, bought to drive while putting the B6T in the '93. now B6ME powered.
-
Originally posted by Captain Burrito View PostI found one on google images. Cant find any more info on it though. Cant figure out how to upload the picture. Phones being dumb.
https://www.google.com/search?q=fest...1gkV6ewsh77oM:
Please don't chop up Festivas, esp. if they are Clean or close to it.Will Samet
JDMSTIVA - Rest in Peace. Festiva of the Month, May '16 - Best Beater & Bad Luck Award, FMX - (Build Thread)
JDMSTIVA V2 - Racecar, Showcar, Work in Progress - (Build Thread)
1990 LX - B6D swapped, mostly stock.
How to find me:
Facebook messenger is the best way. m.me/willsamet
Feel free to PM me anytime!
Reddit / Snapchat / everywhere else: w4rky
Instagram/Twitter: @WILLSAMET
Comment
-
Originally posted by Captain Burrito View PostIll just add that im not gonna chop up a good festi. This os only gonna happen to a destroyed front end car. Or stripped junkyard shell.
Sent from my SM-N910C using TapatalkWill Samet
JDMSTIVA - Rest in Peace. Festiva of the Month, May '16 - Best Beater & Bad Luck Award, FMX - (Build Thread)
JDMSTIVA V2 - Racecar, Showcar, Work in Progress - (Build Thread)
1990 LX - B6D swapped, mostly stock.
How to find me:
Facebook messenger is the best way. m.me/willsamet
Feel free to PM me anytime!
Reddit / Snapchat / everywhere else: w4rky
Instagram/Twitter: @WILLSAMET
Comment
Comment