Announcement

Collapse
No announcement yet.

wire identification on my festiva

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wire identification on my festiva



    thanks funky technician for the photo


    these 4 wires on my festiva are unplugged and i cannot seem to find where they go, any help is much appreciated. thanks in advance

    1992 festiva

  • #2
    3 and 4 look like the temp sensor plugs for the front of the block. 1 looks like the o2 sensor plug, and 2 looks like the distributor plug.

    If you need a little help, don't forget that I live in your neck of the woods, and I'd be happy to help you out.

    Jim

    Comment


    • #3
      the round metal ones bolt to the front of the head near the water bypass hose on the front. i took those off while replacing the bypass hose and a long bolt holds it on at least one of them. i think that a spark plug wire holder is bolted to it also.

      Comment


      • #4
        Monkeyracing is correct. Also the loose black wire grounds with the other black wire on the same terminal.
        sigpic
        The Don - Midwest Festiva Inc., Missouri Chapter

        Link to my festiva pictures below
        https://fordfestiva.com/forums/album.php?albumid=10
        Celebrating 25 years of festiva(s) ownership.

        Comment


        • #5
          Yeah, I kinda figured the grounds were a given, but I didn't notice that one was missing it's end piece.

          Jim

          Comment

          Working...
          X