Announcement

Collapse
No announcement yet.

It's like im riding a bucking bronco!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • It's like im riding a bucking bronco!!!!

    I bought the car ('89 carb'd, stock) 3 weeks ago, and was told about it but it never happened to me, UNTIL yesterday.

    The car runs perfect all the time, no problems at all. then i was getting on the freeway and WHAM, it started. 1/2 way through 1st gear it feels like someone is turning the gas off, it doesn't backfire or anything just boggs way down. If you SLOWLY , and i mean slow, you can accelerate no problem. also when you get into high RPM it goes away. just under acceleration. and it is completely random. I pulled over, and sat for a minute, got mad and reved the crap out of it. and then it worked fine.

    It was fine until i decided to do a "burnout" this morning. it started doing it after that too. can figure it out. the carb has gas in the bowl..

    also i have found, if its in the driveway, if you slowly advance the throttle under the hood, it will stumble and die around 3000rpm, if i spray carb cleaner in right at that time it revs higher, carb cleaner is supposed to kill it, so im thinking there is more air than fuel, and the cleaner removes the extra air, makeing a better a/f ratio. what could cause this?
    If It's worth doin' It's worth Overdoin'

  • #2
    carb cleaner burns quicker than gas so your probly not getting enough fuel, get a carb rebuild kit and clean your jets

    91 L - modified to SLX- "Tin Can Project"
    http://www.cardomain.com/ride/2850897
    92 GL - parts car
    97 aspire - parts car
    87 323 DX - daily driver

    Visit My Store - New Products available!
    http://www.cafepress.com/tunner

    Car enthusiasts will respect all makes and models that preform.
    Brand enthusiasts are the root of all problems in the car community.

    Comment


    • #3
      I readjusted the valves to spec (.012) and it seems to run fine now. maybe i just knocked the junk loose that was in the jets. how easy is it to get to the jets in these carburetors, i may do that next time it acts up (if it does)
      If It's worth doin' It's worth Overdoin'

      Comment


      • #4
        Originally posted by tbird302v8
        I readjusted the valves to spec (.012) and it seems to run fine now. maybe i just knocked the junk loose that was in the jets. how easy is it to get to the jets in these carburetors, i may do that next time it acts up (if it does)
        well if your careful and take your time its not bad at all. If you rebuild your carb be careful because the springs are small and like to fly. the key is take your time and keep everything clean.

        91 L - modified to SLX- "Tin Can Project"
        http://www.cardomain.com/ride/2850897
        92 GL - parts car
        97 aspire - parts car
        87 323 DX - daily driver

        Visit My Store - New Products available!
        http://www.cafepress.com/tunner

        Car enthusiasts will respect all makes and models that preform.
        Brand enthusiasts are the root of all problems in the car community.

        Comment


        • #5
          mine did that and i changed the plug wires and fixed it.
          89 L, hopefully returning from the dead soon with a little more power... :twisted:
          http://www.fordfestiva.com/forums/sh...77-my-89-build
          92 integra, daily driver, broke a clutch disc, sold
          New dd, 02 Nissan sentra, 1.8 5 spd

          Comment

          Working...
          X