MSD 6A ignition module and coil

[perucho]

Is anyone here using an MSD 6A module in their Festiva? I have one sitting in my garage along with a blaster coil that I might as well install in my festy. Which wires go where? Does the magnetic pickup wire from the module gets used or is the installation done according to the instructions for a points/electronic ignition amplifier install? Any info will be greatly appreciated. Thanks!

Oscar

[PoonRacing]

I have it on my 93, I use the existing coil wire for the input to the MSD box, from the car Black/White wire go to the MSD box Red, Yellow/Green wire go to White wire. I got it mount at the Firewall over the passage side. Good Luck -Sam

[perucho]

Thanks, that's exactly what I was looking for. I was not sure which diagram worked with the festy but your reply clarified that. Here's the diagram if anyone else is interested.

[25Horseplay]

I have it on my 93, I use the existing coil wire for the input to the MSD box, from the car Black/White wire go to the MSD box Red, Yellow/Green wire go to White wire. I got it mount at the Firewall over the passage side. Good Luck -Sam

Sam! Glad to see you!

[kzbill]

OK, now........ Happy Thanksgiver!!!!! to all and don't just stuff the turkey, mine's in the oven!

[FastOrBust]

did you notice a difference when you put it in

[kzbill]

the turkey?

[phantorn]

one of mine has a msd,sat up now no spark,no pulse fromstator