91 Festiva (USA model) w/ B6T swap
Mine broke, just when I was getting the B6T street legit. Now I have it set to drive and no idea if it will with a cylinder I had to grab off another car.
(I lost the ignition key)
It looks like it only makes contact (corrected) when the key is in and the column is not locked
It has a red wire with a yellow stripe, and a green wire - or it did until I dropped the cylinder while reaching into the dash to try and find a harness connector...
When I looked inside it to try and see if it was repairable it looked like the contacts were fused together anyway
I'm thinking green would be a ground, so what is that R/Y signal and were is it going?
Mine broke, just when I was getting the B6T street legit. Now I have it set to drive and no idea if it will with a cylinder I had to grab off another car.
(I lost the ignition key)
It looks like it only makes contact (corrected) when the key is in and the column is not locked
It has a red wire with a yellow stripe, and a green wire - or it did until I dropped the cylinder while reaching into the dash to try and find a harness connector...
When I looked inside it to try and see if it was repairable it looked like the contacts were fused together anyway
I'm thinking green would be a ground, so what is that R/Y signal and were is it going?
Comment