I was putting a tilt steering column in today and I ran across a switch I havent seen before. This is an automatic car so it may be tranny related. Never seen it on a five speed before. Its the small white box on the ignition switch. It has two wires going to it. One is a red with yellow tracer and the other is green. Inside the little white box in a contact point. When you turn the key a small plunger comes out of the ingintion switch and closes the contact point inside the little white box. Im switching this car over to a five speed so I wonder if I should use the igintion switch that came on the auto or use the ignition switch that is on the tilt column which came off a five speed. The ignition switch on the manual column does not have wires coming from the white box



Comment