Engine Light pops on occasionally

[doylerl]

Hey Joe, the original sensors are high dollar, a universal sensor will work for you and save you some $. Just a tip, in hopes that you'll turn us on to another great video clip .... ;^)

Fresh is correct. That is if you can find an original. I could only find universal, so that is what I used. You want to use the wire off of the old one, so you have the right connector though. Also, mine was seized in there so bad, I had to cut the entire wire off and used a regular deep well socket on it with a breaker bar. The sockets they sell for the sensor was just slipping all the way around it, because of the open notch on it. Anyway, good luck, and I hope it fixes your problem.

[funky technician]

check your VAF also, even a loose plug on it